{"title":"New Arrivals","description":"","products":[{"product_id":"taxicab-yellow-pla-prime","title":"Taxicab Yellow PLA Prime","description":"\u003ch2\u003eTaxicab Yellow PLA Prime\u003c\/h2\u003e\n\u003cp\u003ePolylactic Acid is a biodegradable, eco-friendly plastic, known for its ease of use and low warpage quality. PLA Prime is our high performance PLA 3D printing filament. It is made from Natureworks Ingeo 3D850 and shows improved heat resistance, more toughness, good adhesion and less warping or curling than traditional PLA. PLA was always the go-to basic filament and is still recommended when you start your journey with 3D printing, without needing to change any of your profiles you can up your game by printing with Coex 3D PLA Prime - available in most of our standard PLA colors. \u003cbr\u003e\u003cbr\u003eThis high performance material will be perfect for that special print or prototype that you've been wanting to make but weren't sure if PLA was the best material for the job.  Please realize though that all grades of PLA will still have limitations. If you truly need high strength and high heat resistance you may want to explore other materials for your project or part.\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":50162878742806,"sku":"CX08-3600-18-1KG","price":32.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":50162878775574,"sku":"CX08-3600-18-5LB","price":70.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Taxicab-Yellow-PLA-Prime-COEX-3D-24935497.jpg?v=1765323163"},{"product_id":"inferno-orange-pla","title":"Inferno Orange PLA","description":"\u003cp\u003e\u003cspan\u003eCoex 3D Inferno Orange PLA\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eUnlock precision printing with Coex 3D Standard PLA Filament - the reliable foundation for your creative vision. Our premium PLA (Polylactic Acid) filament delivers exceptional quality for makers at every level.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc space-y-1.5 pl-7\"\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eConsistent 1.75mm diameter with tight ±0.03mm tolerance for smooth, jam-free printing\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eManufactured from renewable plant-based resources for eco-conscious creation\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eCompatible with all standard FDM\/FFF 3D printers\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eLow warping and minimal odor during printing\u003c\/li\u003e\n\u003cli class=\"whitespace-normal break-words\"\u003eVibrant, fade-resistant colors that maintain integrity throughout your prints\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"[\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc space-y-1.5 pl-7\"\u003e\u003c\/ul\u003e\n\u003cp style=\"text-align: left;\"\u003eWhether you're prototyping a new design, creating functional parts, or bringing artistic concepts to life, Coex 3D Standard PLA delivers reliable performance print after print. Each spool is vacuum-sealed with desiccant to ensure optimal moisture protection and comes with a 100% satisfaction guarantee.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eElevate your 3D printing experience today with Coex 3D Standard PLA - where quality meets creativity.\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cdiv style=\"text-align: left;\"\u003eCoex's PLA is made with Virgin NatureWorks Ingeo 4043D resin, high-quality colorant only, and no fillers.\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003eAll of Coex 3D's filament is made in our production facility located in Wisconsin, USA.\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cstrong\u003eOur Standard PLA is as good or better than most competitors' PLA+ or PLA Prime.\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":50162878808342,"sku":"CX02-2700-18-1KG","price":24.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":50162878841110,"sku":"CX02-2700-18-500G","price":19.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":50162878873878,"sku":"CX02-2700-18-5LB","price":54.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":50162878906646,"sku":"CX02-2700-30-1KG","price":24.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":50162878939414,"sku":"CX02-2700-30-5LB","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Inferno-Orange-PLA-COEX-3D-24935756.jpg?v=1765323165"},{"product_id":"inferno-orange-abs-1","title":"Inferno Orange ABS+","description":"\u003ch2\u003eInferno Orange ABS+\u003c\/h2\u003e\n\u003cp\u003eABS+ filament is a thermoplastic 3d printing filament.  ABS, which stands for Acrylonitrile Butadiene Styrene. Coex ABS + or ABS Prime is an engineering grade material made from a higher grade base resin which will provide an even stronger finished print than the standard Coex ABS filament.  ABS is used by a variety of manufacturing industries for parts requiring structural integrity and detail and is commonly used in rapid prototyping and additive manufacturing environments to test product impact resistance and durability.  This 3D printer filament comes in a variety of colors and is available in 1.75 and 2.85mm diameters, and comes in 500 g, 5 lbs, 15 lbs and 1 kg spool weights.\u003c\/p\u003e\n\u003cdiv\u003e \u003c\/div\u003e\n\u003cp\u003eAs opposed to PLA and PETG filament, ABS Prime is a bit more technical and may be more challenging for new 3D printing users and requires the use of an enclosed 3D printer.  ABS is a stiff 3D printing material that will be impact and heat resistant. Common applications for ABS include end-use tools, moving parts, and parts that must withstand high mechanical stress. \u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":50162878972182,"sku":"CX09-2700-18-1KG","price":34.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":50162879004950,"sku":"CX09-2700-18-500G","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Inferno-Orange-ABS_-COEX-3D-24936013.png?v=1765323169"},{"product_id":"black-coexnylex™-unfilled-nylon","title":"Black CoexNylex™ Unfilled Nylon","description":"\u003ch2\u003eBlack CoexNylex™ Unfilled Nylon\u003c\/h2\u003e\n\u003cp\u003eUnfilled Nylon, Black in color.  CoexNylex™ combines outstanding heat resistance with chemical and hydrolysis resistence\u003cbr\u003e\u003cspan style=\"font-size: 11pt;\"\u003e\u003cspan style=\"line-height: 107%;\"\u003e\u003cspan style=\"font-family: Calibri,sans-serif;\"\u003e\u003cbr\u003eCoexNylex™ Nylon is manufactured from the highest quality nylon developed by Dupont. Coex Nylex is able to be printed on most 3D printers to produce extremely durable and strong parts.\u003c\/span\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cbr\u003e. \u003cbr\u003eRecommended print settings:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePrint on a solvent-cleaned surface heated to 85°C-110°C\u003c\/li\u003e\n\u003cli\u003eRecommended print temperature 245°C-295°C\u003c\/li\u003e\n\u003cli\u003ePart cooling fan is not recommended. It may cause layer delamination.\u003c\/li\u003e\n\u003cli\u003eStart retraction at 1-1.5 mm at 10-30 mm\/sec for direct-drive extruders and 2.5 mm at 30-35 mm\/sec for indirect-drive extruders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/COEX_TDS_CX21-COEX-NYLEX_UNFILLED_03-11-2022_REV_1.0.pdf?v=1659963612\"\u003eCoexNylex Unfilled TDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/docs.google.com\/spreadsheets\/d\/e\/2PACX-1vT2-Fag4OEjo6biFbQZa6hJaJk34HtCP3NBiRN3-3C_HpgKk7t2rYz-cHyi0AjUEcRW0qwQR_oXTj4P\/pubhtml?gid=2066357310\u0026amp;single=true\"\u003eCoexNylex Trial Results\u003c\/a\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Nylex_graph_edb23f94-4571-4df1-bed9-8ab52598060f.png?v=1698937379\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0603\/1795\/8327\/files\/Nylex_graph_edb23f94-4571-4df1-bed9-8ab52598060f.png?v=1698937379\" alt=\"nylon strength test\"\u003e \u003c\/a\u003e\u003c\/div\u003e\n\u003cp\u003e*Graph courtesy of Ryan Laffin; Nylex Customer Test Participant\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":50162879037718,"sku":"CX21-0300-18-1KG","price":85.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":50162879070486,"sku":"CX21-0300-30-1KG","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Black-CoexNylexTM-Unfilled-Nylon-COEX-3D-24936359.jpg?v=1765323169"},{"product_id":"natural-petg","title":"Natural PETG","description":"\u003ch2\u003eNatural PETG\u003c\/h2\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Natural PETG is made with Virgin resin and no fillers.  All of Coex's filament is made in our production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. We provide filament that gives excellent-looking and strong prints.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Coex 3D Natural PETG filament appears \"clear\" and is not a creamy white color as depicted in the \"natural\" spool photo.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eRecommended Print Settings\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with our PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/coex3d.com\/products\/magigoo-original-50ml\" title=\"Coex 3D Magigoo Original 50mL Shop Page\" target=\"_blank\" rel=\"noopener\"\u003eMagigoo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMPORTANT NOTE! \u003c\/strong\u003ePETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or \u003ca href=\"https:\/\/coex3d.com\/products\/magigoo-original-50ml\" title=\"Coex 3D Magigoo Original 50mL Shop Page\" target=\"_blank\" rel=\"noopener\"\u003eMagigoo\u003c\/a\u003e) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOther Printing Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying our PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduce print temperature.\u003c\/strong\u003e Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncrease retraction.\u003c\/strong\u003e Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnable \"Wipe while Retracting\" in your slicer.\u003c\/strong\u003e Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.).\u003c\/strong\u003e Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":50162879103254,"sku":"CX13-0100-18-1KG","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":50162879136022,"sku":"CX13-0100-18-500G","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":50162879168790,"sku":"CX13-0100-18-5LB","price":71.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":50162879201558,"sku":"CX13-0100-18-9LB","price":127.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 15lb","offer_id":50162879234326,"sku":"CX13-0100-18-15LB","price":206.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":50162879267094,"sku":"CX13-0100-30-1KG","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":50162879299862,"sku":"CX13-0100-30-5LB","price":71.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 15lb","offer_id":50162879332630,"sku":"CX13-0100-30-15LB","price":206.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Natural-PETG-COEX-3D-24936874.png?v=1765323177"},{"product_id":"raspberry-petg","title":"Raspberry PETG","description":"\u003ch2\u003eRaspberry PETG\u003c\/h2\u003e\n\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp\u003eCoex 3D Raspberry PETG is made with Virgin resin and high-quality colorant only, with no fillers.  All of Coex's filament is made in our production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. We provide filament that gives excellent-looking and strong prints.\u003c\/p\u003e\n\u003ch2\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with our PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/coex3d.com\/products\/magigoo-original-50ml\" title=\"Coex 3D Magigoo Original 50mL Shop Page\" target=\"_blank\" rel=\"noopener\"\u003eMagigoo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMPORTANT NOTE! \u003c\/strong\u003ePETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or \u003ca href=\"https:\/\/coex3d.com\/products\/magigoo-original-50ml\" title=\"Coex 3D Magigoo Original 50mL Shop Page\" target=\"_blank\" rel=\"noopener\"\u003eMagigoo\u003c\/a\u003e) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOther Printing Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying our PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduce print temperature.\u003c\/strong\u003e Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncrease retraction.\u003c\/strong\u003e Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnable \"Wipe while Retracting\" in your slicer.\u003c\/strong\u003e Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.).\u003c\/strong\u003e Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":50162879365398,"sku":"CX13-1300-18-1KG","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":50162879398166,"sku":"CX13-1300-18-500G","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":50162879430934,"sku":"CX13-1300-18-5lb","price":71.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 9lb","offer_id":50162879463702,"sku":"CX13-1300-18-9LB","price":127.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":50162879496470,"sku":"CX13-1300-30-1KG","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":50162879529238,"sku":"CX13-1300-30-5lb","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Raspberry-PETG-COEX-3D-24937852.png?v=1765323178"},{"product_id":"blueberry-petg","title":"Blueberry PETG","description":"\u003cp\u003ePETG (PolyEthylene Terephthalate plus Glycol) is a co-polyester used in 3D printing for its durability, impact resistance, and temperature resistance. PETG is the second most popular 3D printing filament behind the ubiquitous PLA. It has qualities comparable to ABS but can be printed without an enclosure or fume handling requirements. Unlike ABS, however, PETG cannot be vapor smoothed using acetone.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCoex 3D Blueberry PETG is made with Virgin resin and high-quality colorant only, with no fillers.  \u003cspan data-mce-fragment=\"1\"\u003eAll of Coex's filament is made in our production facility located in Wisconsin, USA. Coex 3D uses industrial-grade extruders and laser measuring quality control to ensure quality, consistency, and a 1.75±0.03mm diameter specification with every spool. We provide filament that gives excellent-looking and strong prints.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eRecommended Print Settings\u003c\/h2\u003e\n\u003cp\u003eCoex 3D recommends the following settings when printing with our PETG. Settings will vary depending on your specific print setup.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend Temperature: 230 °C - 245 °C\u003c\/li\u003e\n\u003cli\u003eBed Temperature: 70 °C - 90 °C\u003c\/li\u003e\n\u003cli\u003eHeated Bed Recommended\u003c\/li\u003e\n\u003cli\u003eRecommended Build Surfaces\/Adhesives:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003ePEI Build Surface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eGlass Build Surface\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/coex3d.com\/products\/magigoo-original-50ml\" title=\"Coex 3D Magigoo Original 50mL Shop Page\" target=\"_blank\" rel=\"noopener\"\u003eMagigoo\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eGlue Stick\u003c\/li\u003e\n\u003cli\u003ePainter's Tape\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCooling Fan: Recommended. PETG works best with slightly less cooling than PLA. 50-75% fan speed is recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIMPORTANT NOTE! \u003c\/strong\u003ePETG can fuse to glass and PEI print surfaces, causing damage to the print bed when the part is removed. For that reason, Coex 3D recommends always using an additional adhesion agent (such as glue stick or \u003ca href=\"https:\/\/coex3d.com\/products\/magigoo-original-50ml\" title=\"Coex 3D Magigoo Original 50mL Shop Page\" target=\"_blank\" rel=\"noopener\"\u003eMagigoo\u003c\/a\u003e) which will help the finished part to release from the print bed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOther Printing Tips\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePETG is slightly more hygroscopic than PLA, so drying your filament can be necessary if it is exposed to humidity. Coex 3D recommends drying our PETG at 65 °C for at least 3 hours. You can tell when your filament needs drying if you experience under-extrusion\/inconsistent extrusion, and\/or excess stringing. Hearing a \"popping\" sound during a print is another sign of filament that needs to be dried.\u003c\/li\u003e\n\u003cli\u003ePETG can often result in more stringing than would be expected with PLA or similar filaments. There are a few steps you can take to reduce stringing:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduce print temperature.\u003c\/strong\u003e Keep in mind that reducing print temperature will slightly decrease layer adhesion and part strength, but can help reduce stringing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncrease retraction.\u003c\/strong\u003e Increasing retraction length can help reduce stringing, especially on Bowden-style extrusion configurations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnable \"Wipe while Retracting\" in your slicer.\u003c\/strong\u003e Most slicers allow for this option, which will start a travel move just before\/during the filament retraction. This helps \"wipe off\" the nozzle as a travel move starts, reducing stringing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnable \"Combing Mode\" (Cura) or \"Avoid Crossing Perimeters\" (PrusaSlicer\/SuperSlicer\/etc.).\u003c\/strong\u003e Rather than travel moves always going in a straight line, this will cause them to choose a path that avoids crossing over perimeters, effectively keeping the nozzle \"inside\" the print area wherever possible. This eliminates stringing right at the source but still cannot eliminate it all (such as between multiple parts).\u003c\/li\u003e\n\u003cli\u003eUnfortunately in many cases stringing is impossible to fully eliminate, so some post-processing of prints is often necessary.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":50162879594774,"sku":"CX13-5700-18-1KG","price":33.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":50162879627542,"sku":"CX13-5700-18-500G","price":21.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":50162879660310,"sku":"CX13-5700-18-5lb","price":71.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":50162879693078,"sku":"CX13-5700-30-1KG","price":33.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":50162879725846,"sku":"CX13-5700-30-5lb","price":71.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Blueberry-PETG-COEX-3D-24938938.png?v=1765323195"},{"product_id":"white-pla-prime","title":"White PLA Prime","description":"\u003ch2\u003e\u003cspan data-mce-fragment=\"1\"\u003eCoex White PLA Prime\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003ePolylactic Acid filament is a biodegradable, eco-friendly plastic, known for its ease of use and low warpage quality. PLA Prime is our high performance PLA 3D printing filament. It is made from Natureworks Ingeo 3D850 and shows improved heat resistance, more toughness, good adhesion and less warping or curling than traditional PLA. PLA was always the go-to basic filament and is still recommended when you start your journey with 3D printing, without needing to change any of your profiles you can up your game by printing with Coex 3D PLA Prime - available in most of our standard PLA colors.  This high performance material will be perfect for that special print or prototype that you've been wanting to make but weren't sure if PLA was the best material for the job.  Please realize though that all grades of PLA will still have limitations. If you truly need high strength and high heat resistance you may want to explore other materials for your project or part.\u003c\/span\u003e\u003c\/p\u003e","brand":"COEX 3D","offers":[{"title":"1.75mm \/ 1kg","offer_id":50162879758614,"sku":"CX08-0200-18-1KG","price":32.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 5lb","offer_id":50162879791382,"sku":"CX08-0200-18-5LB","price":70.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1kg","offer_id":50162879824150,"sku":"CX08-0200-30-1KG","price":32.0,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 5lb","offer_id":50162879856918,"sku":"CX08-0200-30-5LB","price":70.0,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 500g","offer_id":50162879889686,"sku":"sku-41937609490615","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/White-PLA-Prime-COEX-3D-24939226.jpg?v=1765323197"},{"product_id":"bondtech-qr-extruder","title":"Bondtech QR Extruder","description":"\u003ch3\u003eBondtech QR-M Extruder\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eDo I need a QR or a QR-M?? \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Bondtech QR is meant for hotends that utilize a groove mounting system. The Bondtech QR-M brings the same record level of torque and resolution as the Bondtech QR, but is designed specifically to fit the Slice Engineering Mosquito family of hotends!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe QR-M extruder is the perfect match for\u003cspan\u003e \u003c\/span\u003e\u003cb\u003ebig printers\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eto fit Mosquito hotends on\u003cspan\u003e \u003c\/span\u003e\u003cb\u003edirect extruder applications\u003c\/b\u003e. Compatible with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMosquito\u003c\/li\u003e\n\u003cli\u003eMosquito Magnum\u003c\/li\u003e\n\u003cli\u003eMosquito Liquid\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eMosquito Magnum+\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe QR-M extruder also provides:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVersatile Solutions - there are 4 different units available for right\/left handed orientation, as well as 3.00 and 1.75 mm filament diameters.\u003c\/li\u003e\n\u003cli\u003eBuild Quality - Professionally SLS printed nylon for maximum strength and precision.\u003c\/li\u003e\n\u003cli\u003eBondtech Dual-Drive - Bondtech's unique Dual-Drive technology delivers uninterrupted material flow without fear of grinding or slipping in even the most demanding conditions.\u003c\/li\u003e\n\u003cli\u003eMulti-material capability - The QR-M extruder feeds all material with high reliability, from slippery nylons to highly rigid and sometimes brittle carbon-filled filaments.\u003c\/li\u003e\n\u003cli\u003eQuick Release\u003c\/li\u003e\n\u003cli\u003eFeeding direction - The QR-M feeds material with equal force in both directions so it is flexible when it comes to integrate it in your application.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ Mosquito","offer_id":50163813286166,"sku":"EXT-QRM-1.75","price":59.97,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ Mosquito","offer_id":50163813318934,"sku":"EXT-QRM-3.0","price":49.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Bondtech-QR-Extruder-HartSmart-Products-24939574.jpg?v=1765323199"},{"product_id":"3drs-sidekick-durable-additive","title":"3DRS Sidekick Durable Additive","description":"\u003ch3\u003e3DRS Sidekick Durable Additive\u003c\/h3\u003e\n\u003cp\u003eThis bottle packs a punch! Increase the strength and durability of brittle resin with Sidekick, or print flexible parts by using Sidekick as is!\u003c\/p\u003e\n\u003cp\u003eSold in a 500g Leakproof container.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Storage Information:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStore in a cool and DARK place between 18-28C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAvoid any direct sunlight during usage\u003c\/li\u003e\n\u003cli\u003eShake well before use\u003c\/li\u003e\n\u003cli\u003eAfter printing, please wash your print in alcohol with the content of above 90\u003c\/li\u003e\n\u003cli\u003eUse at temperature 18-28C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/tbF3QVn1D1M\" height=\"422\" width=\"750\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163813220630,"sku":"DLPCB52-1_500B","price":9.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/3DRS-Sidekick-Durable-Additive-HartSmart-Products-24939931.png?v=1765323203"},{"product_id":"vanadium™-nozzle","title":"Vanadium™ Nozzle","description":"\u003ch3\u003eSlice Engineering Vanadium™ Nozzle\u003c\/h3\u003e\nNeed an abrasion resistant nozzle that conducts heat as well as a Brass one? Check out these Slice Engineering Vanadium nozzles!\n\u003cul data-rte-list=\"default\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHard to the Core - Vanadium™ Nozzles are hardened and tempered to 65 Rockwell C all the way through the substrate, not just on the surface. \u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCrafted from vanadium-alloyed high-speed steel for superior abrasion resistance at printing temperatures.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSurface coated with a wear-resistant, plastic repellent coating to keep your nozzle as clean as possible.  \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompatible with common metric (6 mm) and standard (1\/4 in) socket tools for easy installation.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRep Rap style (M6 x 1.0 threads with a 7 mm thread length and 12.5 mm overall length)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e100% Made in USA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HartSmart Products","offers":[{"title":"0.2mm","offer_id":50163813384470,"sku":"P-VN-NO-0026-0.2","price":22.99,"currency_code":"USD","in_stock":true},{"title":"0.3mm","offer_id":50163813417238,"sku":"P-VN-NO-0027-0.3","price":22.99,"currency_code":"USD","in_stock":true},{"title":"1.2mm","offer_id":50163813450006,"sku":"P-VN-NO-0080-1.2","price":22.99,"currency_code":"USD","in_stock":false},{"title":"1.4mm","offer_id":50163813482774,"sku":"P-VN-NO-0080-1.4","price":22.99,"currency_code":"USD","in_stock":true},{"title":"1.8mm","offer_id":50163813515542,"sku":"P-VN-NO-0080-1.8","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/VanadiumTM-Nozzle-HartSmart-Products-24940045.jpg?v=1765323205"},{"product_id":"bondtech-bmg-alu-mount","title":"Bondtech BMG ALU-Mount","description":"\u003ch3 data-mce-fragment=\"1\"\u003eBondtech BMG ALU-Mount\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis mount for BMG extruder is CNC machined to precise tolerances in 3 mm thick aluminium that assures a secure and stable mounting for the extruder.\u003c\/span\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mount is clamped between the motor and the rear housing of the extruder. It can be rotated in 90 degrees increments in order to mount the extruder according to your needs. Mounting holes in the bottom flange is 4.2 mm in diameter. vertical 18.0 mm, horizontal 50.0 mm.\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163813253398,"sku":"10115","price":4.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Bondtech-BMG-ALU-Mount-HartSmart-Products-24941074.jpg?v=1765323213"},{"product_id":"magigoo-original-3d-printing-adhesive","title":"Magigoo Original 3D Printing Adhesive","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/Magigoo-Purple-Vector_480x480.jpg?v=1584117749\"\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003eAll you need for sure adhesion of 3D prints\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003eMagigoo is an easy to use 3D printing adhesive designed to address 'the first layer not sticking problem'. Magigoo ensures a strong adhesion to the hot plate. But the magic starts when printing is ready: just wait for the plate to cool down and then remove your prints with just a finger flick! In addition, Magigoo helps to prevent warping. Isn't it magic? Regardless of you being a hobbyist or professional - it is extremely rewarding to have a 30 hour print complete without any warping and having it release easily once cooled.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOver 100 applications\u003c\/li\u003e\n\u003cli\u003eABS, PLA, PETG, HIPS, ASA, TPU\u003c\/li\u003e\n\u003cli\u003eEasy application\u003c\/li\u003e\n\u003cli\u003eEasy release\u003c\/li\u003e\n\u003cli\u003eEasy clean\u003c\/li\u003e\n\u003cli\u003eNo smell\u003c\/li\u003e\n\u003cli\u003eNon-toxic\u003c\/li\u003e\n\u003cli\u003eNo additional tools needed\u003c\/li\u003e\n\u003cli\u003eEasy to transport\u003c\/li\u003e\n\u003cli\u003eNicer print finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMain Features \u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy application: applying Magigoo is as easy as child's play. Shake, press, apply. Spread on an active printing area only. No need to cover the whole surface\u003c\/li\u003e\n\u003cli\u003eEasy-release: Magigoo adhesive properties are designed to release the 3D print once the build plate has cooled.\u003c\/li\u003e\n\u003cli\u003eEasy-clean: Magigoo is easily cleaned with water.\u003c\/li\u003e\n\u003cli\u003eLong-lasting: Magigoo last for 100+ average prints.\u003c\/li\u003e\n\u003cli\u003eOdorless and safe: Magigoo is safe to use - be it in a closed room or educational workshop with kids.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/MSDS_Orig_PC_PA.pdf?v=1584119361\" target=\"_blank\"\u003eMagigoo Original SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/Designed_TDS_v1.5.pdf?v=1584119362\" target=\"_blank\"\u003eMagigoo Original TDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant note :\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe applicator has an active spring valve, which activates when applicator is pressed against the build plate. Please do not press the bottle as \"ketchup bottle\" , otherwise  the applicator may pop off. Bottle may be slightly squeezed, \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eonly\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewhen the nib is pressed against the bed and it may be necessary only if bigger flow is required. Bottle must not be squeezed when cap is off any other time as it may result in glue popping out of the bottle. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/Do_not_press_web_480x480.jpg?v=1584117762\"\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"120ml","offer_id":50163814105366,"sku":"MGORG","price":46.99,"currency_code":"USD","in_stock":false},{"title":"50ml","offer_id":50163814138134,"sku":"MO2016","price":19.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Magigoo-Original-3D-Printing-Adhesive-HartSmart-Products-24941262.webp?v=1765323215"},{"product_id":"e3d-v6-all-metal-hotend","title":"E3D V6 All-Metal HotEnd","description":"\u003ch3\u003eE3D V6 Hotend\u003c\/h3\u003e\n\u003cp\u003eThe V6 is E3D's market-leading signature HotEnd. If you would like to know more about the design process, check out their blog post!\u003c\/p\u003e\n\u003cp\u003eAssembly guides for the V6 can be found \u003ca href=\"https:\/\/e3d-online.dozuki.com\/Guide\/V6+Assembly\/6\"\u003ehere\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrint the Widest Possible Range of Materials\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eE3D's signature all-metal design allows you to reliably print high temperature materials, and add extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Temperature Performance\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe V6 can comfortably reach 285°C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400°C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK\/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating. For more information about the maximum temperature recommendation please visit \u003cspan\u003e\u003ca href=\"https:\/\/e3d-online.dozuki.com\/Wiki\/Maximum_temperatures_for_the_V6?revisionid=HEAD\"\u003ethis documentation page\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eE3D focused on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X\/Y dimensions!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to Use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe new thermistor cartridge simply slides into place and is secured with a single screw. It uses high temperature glass sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Quality Printing\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA sharp thermal transition gives the high quality printing performance that users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdaptable\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe V6 is a fully-integrated part of the E3D Ecosystem. The range of nozzles and blocks gives you more opportunity to choose how you want to print. Choose from different filament diameters and materials to take your printing to the next level, and upgrade for ultra high-temperature printing!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSupport\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere is a very active user base on many printer forums, including RepRap Forums, Google+, SeeMeCNC, Solidoodle, Ultimaker and many others. There is also an E3D Forum where many people share and collaborate on clever solutions for mounting on various printers. E3D values the community that uses their products and they look to support development wherever possible. They're always there to support you in using your HotEnd - whether that means giving advice on public forums, or private email support through the contact system.\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ Bowden \/ 12V","offer_id":50163814695190,"sku":"V6-175-B","price":34.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/E3D-V6-All-Metal-HotEnd-HartSmart-Products-24942232.png?v=1765323226"},{"product_id":"modix-v3-optional-secondary-printhead-titan-aero","title":"Modix v3 Optional Secondary Printhead - Titan Aero","description":"\u003ch3\u003eSecondary Printhead for Modix Version 3 3D Printers\u003c\/h3\u003e\n\u003cp\u003eAdd a secondary direct drive printhead to your v3 Modix machine! Comes with all necessary parts to add a second Titan Aero \u0026amp; Volcano print head.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIn version 3, both primary and secondary extruders are mounted on the printhead, enabling better dual-color and soluble material printing than ever before.\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163813646614,"sku":"Modix-V3Upgrade-SecondPrintHead","price":49.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Modix-v3-Optional-Secondary-Printhead-Titan-Aero-HartSmart-Products-24942775.jpg?v=1765323231"},{"product_id":"titan-aero-heatsink","title":"Titan Aero Heatsink","description":"\u003ch3\u003e\u003cspan\u003eE3D Titan Aero Heatsink\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eAn individual replacement Titan Aero heat sink. A spare part custom-engineered by E3D for the Titan Aero combination HotEnd and Extruder.\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Standard \/ 1.75mm","offer_id":50163814007062,"sku":"TITAN-AERO-SINK-175-RH","price":9.97,"currency_code":"USD","in_stock":false},{"title":"Mirrored \/ 1.75mm","offer_id":50163814039830,"sku":"TITAN-AERO-SINK-175-LH","price":9.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Titan-Aero-Heatsink-HartSmart-Products-24942892.jpg?v=1765323232"},{"product_id":"magigoo-pp-3d-printing-adhesive","title":"Magigoo PP 3D Printing Adhesive","description":"\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/Magigoo-Purple-Vector_480x480.jpg?v=1584117749\"\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cstrong\u003eAll you need for sure adhesion of 3D prints\u003c\/strong\u003e \u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cstrong\u003eMAGIGOO PP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis designed for professional use, to work exclusively with polypropylene filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off if the included procedure is followed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWHY:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePolypropylene (PP) is a thermoplastic semi-crystalline polymer exhibiting properties of good impact resistance and ductility. It also has a relatively non-polar molecular structure which makes it chemical resistant and thus ideal for use in food packaging and medical equipment. It is in fact well known in the adhesive industry that it is difficult to adhere polyolefin materials to other types of materials. This combined by the partial crystallinity makes it an especially hard material to print with. Magigoo PP solves this issue and provides additional convenience for use in FDM 3D Printing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHOW:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMAGIGOO PP has been designed and tested to work with different PP filament brands.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethe bottle vigorously.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eaccording to the filament\/printer manufacturers recommendations\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllow to cool and Remove\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e– The Part should become easier to remove after sufficient cooling. If the part is hard to remove, a scraper should be used to assist part removal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- Use a wet hard sponge to remove all glue residue. Once the glue layer is wet it will form a white layer which can be easily scrubbed off with an abrasive sponge. Once the layer is completely loose from the glass it can be wiped away with a wet cloth and finally cleaned with a dry paper towel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eSAFETY:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis adhesive is for professional use. Contact with eyes causes serious eye damage, Wash hands and exposed skin thoroughly after handling.\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003eTips:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor larger prints a 20 mm brim with multiple layers is recommended.\u003c\/p\u003e\n\u003cp\u003eIn cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/MSDS_-_PP_melissa.pdf?v=1584119361\" target=\"_blank\"\u003eMagigoo PP SDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/Designed_TDS_PP_v1.5.pdf?v=1584119362\" target=\"_blank\"\u003eMagigoo PP TDS\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant note :\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe applicator has an active spring valve, which activates when applicator is pressed against the build plate. Please do not press the bottle as \"ketchup bottle\" , otherwise  the applicator may pop off. Bottle may be slightly squeezed, \u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eonly\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewhen the nib is pressed against the bed and it may be necessary only if bigger flow is required. Bottle must not be squeezed when cap is off any other time as it may result in glue popping out of the bottle. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"display: block; margin-left: auto; margin-right: auto;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0027\/5339\/6848\/files\/Do_not_press_web_480x480.jpg?v=1584117762\"\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163813974294,"sku":"MGPP","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Magigoo-PP-3D-Printing-Adhesive-HartSmart-Products-24943326.webp?v=1765323237"},{"product_id":"fan-thermistor-molex-connector-cable","title":"Fan\/Thermistor Molex Connector Cable","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"product-info-main\"\u003e\n\u003cdiv class=\"product attribute overview\"\u003e\n\u003cdiv class=\"value\" itemprop=\"description\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eA nice long (1000mm) thermistor connector cable, red and black color coded for devices which have a polarity (e.g. fans).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConnector 1: Molex Microfit (used on all our fans, thermistors and PT100s)\u003c\/li\u003e\n\u003cli\u003eConnector 2: Dupont 0.1\" (typical used on most microcontroller headers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163813679382,"sku":"E-CABLE-TEMP-1000-MOLEX","price":0.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Fan-Thermistor-Molex-Connector-Cable-HartSmart-Products-24943764.jpg?v=1765323241"},{"product_id":"ender-3-replacement-hotend-assembled","title":"Ender-3 Replacement Hotend (Assembled)","description":"\u003ch3\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cb\u003e\u003c\/b\u003eGenuine Creality MK8 Hotend\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eFully assembled MK8 hotend for Ender-3\/ Ender-3s\/ Ender-3 Pro\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e100% brand new and fully assembled so you can install it on your machine quickly and easily.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eThis MK8 assembled extruder hot end kit is compatible with the Ender-3\/Ender-3s\/Ender-3 Pro\u003cbr\u003eComes with 0.4mm Nozzle, Aluminum Heat Block, Heat Sink, PTFE Tube, Heater Cartridge, Thermistor with Pin Head and Throat Pipe, fully assembled, easy to install.\u003cbr\u003eWhite wire with pin head is the Thermistor, red wire is the Heater Cartridge (24V 40W).\u003cbr\u003e100% official Creality 3D product\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eWorks With: Creality Ender 3, Ender 3s, Ender 3 Pro\u003cbr\u003eNozzle Size: 0.4mm\u003cbr\u003eTube Length: Approx.  40cm Long\u003cbr\u003eThermistor and Cable Length: 1m\u003cbr\u003eThroat Pipe Length: 30mm\u003cbr\u003eAluminum Block Size: Approx. 20 * 20 * 10mm\u003cbr\u003eOperating Temperature Range: -40~+260°C (-40~+500°F)\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163813941526,"sku":"4001030023","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Ender-3-Replacement-Hotend-_Assembled_-HartSmart-Products-24943940.jpg?v=1765323242"},{"product_id":"titan-aero-upgrade-kit-upgrade-titan-extruder-to-titan-aero","title":"Titan Aero Upgrade Kit (Upgrade Titan Extruder to Titan Aero)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 class=\"title-small\"\u003eE3D Titan Aero Upgrade Kit\u003c\/h3\u003e\n\u003ch5 class=\"title-small\"\u003ePower + Performance for your 3D Printer\u003c\/h5\u003e\n\u003cp class=\"product-tab-point-description\"\u003eTitan Aero integrates the Titan extruder and V6 HotEnd into one neat little package. All the lightweight performance, reliability and usability of V6 and Titan, along with some benefits all of its own.\u003c\/p\u003e\n\u003cdiv class=\"product-tab-point\"\u003e\n\u003cdiv class=\"product-tab-point-title\"\u003e\n\u003cspan\u003e01.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eCompact + Rigid\u003c\/div\u003e\n\u003cp\u003eBy combining a hot end and extruder, Titan Aero is ultra compact. It offers you an extra 25mm of Z-axis build height compared to a V6 + Titan combo.\u003c\/p\u003e\n\u003cp\u003eCompact also means rigid. Aero copes brilliantly with knocks and bumps, allowing it to work with the fastest of 3D printers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-tab-point\"\u003e\n\u003cdiv class=\"product-tab-point-title\"\u003e\n\u003cspan\u003e02.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eAccurate Extrusion; Great for Flexibles.\u003c\/div\u003e\n\u003cp\u003eBy having a short, well constrained filament path, Aero is great for flexibles. It minimizes places where filament can bend, buckle and jam, giving a better flexible printing experience.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-tab-point\"\u003e\n\u003cdiv class=\"product-tab-point-title\"\u003e\n\u003cspan\u003e03.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEcosystem Compatible, All Metal HotEnd.\u003c\/div\u003e\n\u003cp\u003eTitan Aero is built on the E3D V6 all metal design, allowing you to reliably 3D print any thermoplastic at temperatures up to 285°C For more information regarding the temperature limits of the Titan aero please visit\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/e3d-online.dozuki.com\/Wiki\/Titan_Aero_recommended_Temperatures\" target=\"_blank\"\u003ethis documentation page\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eIt’s also been designed to take standard V6 heatbreaks, so that you can interchange components from E3D’s entire modular ecosystem to suit your needs. Choose from temperature sensors, heater cartridges, Volcano, or one of the 92+ different nozzles we provide.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-tab-point\"\u003e\n\u003cdiv class=\"product-tab-point-title\"\u003e\n\u003cspan\u003e04.\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eEasy to Install, Easy to Use.\u003c\/div\u003e\n\u003cp\u003eAero is mounted using a standard hole pattern, allowing it to be fitted onto a wide range of 3D printers and making designing mounting solutions straightforward to do.\u003c\/p\u003e\n\u003cp\u003eBy using Titan’s custom engineering and rigorously tested extrusion mechanism, Aero is highly reliable and retains all of the smart usability features. It’s a breeze to load and unload filament, manually extrude, adjust idler tension, and clean out debris from the hobb.\u003c\/p\u003e\n\u003cp\u003eLikewise the use of Titan’s 3:1 gearing ratio allows the use of smaller motors, making for a lighter weight carriage whilst maintaining reliability and pushing power.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"HartSmart Products","offers":[{"title":"24V \/ Mirrored \/ 1.75mm","offer_id":50163813744918,"sku":"TITAN-AERO-UP-KIT-MIR-175-24V","price":9.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Titan-Aero-Upgrade-Kit-_Upgrade-Titan-Extruder-to-Titan-Aero_-HartSmart-Products-24944499.jpg?v=1765323245"},{"product_id":"e3d-titan-aero-full-kit","title":"E3D Titan Aero Full Kit","description":"\u003ch3\u003eE3D Titan Aero Extruder \u0026amp; Hotend - Full Kit\u003c\/h3\u003e\n\u003cp\u003eLooking for a direct drive upgrade for your 3D printer? Titan Aero is a compact direct drive HotEnd and extruder combination. It takes the lightweight performance, reliability, and usability of the V6 and Titan creating a more compact and refined unit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact \u0026amp; Rigid\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy combining the V6 and Titan into a single unit, Titan Aero results in a compact extrusion system, offering you an extra 25mm of Z-axis build height in comparison to the V6 and Titan combination in a direct drive setup.\u003c\/p\u003e\n\u003cp\u003eCompact in this case also means rigid. The shorter overall length with an integrated sink means Titan Aero can cope with the knocks and bumps associated with the fastest of 3D printers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreat for flexibles\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy having a short, well-constrained filament path there is less room for filament to bend, buckle, and jam, meaning Titan Aero is suitable for printing flexible filaments such as TPU with conservative speeds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAll-metal design\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTitan Aero is built around the E3D V6 all-metal design, allowing you to reliably 3D print any filament up to 285°C as standard. For more information regarding maximum temperature ratings and upgrade options please see.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eModular Ecosystem compatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTitan Aero is compatible with the E3D ecosystem, meaning you can upgrade\u003cbr\u003eyour setup to the desired specifications. Choose from our range of heater blocks,\u003cbr\u003etemperature sensors, heater cartridges, and nozzles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEasy to install, Easy to use\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTitan Aero is mounted based on the standard NEMA 17 hole pattern. This provides the ability for it to be fitted to a wide range of 3D printers, making it straightforward to design custom mounting solutions for your setup.\u003c\/p\u003e\n\u003cp\u003eAlternatively, due to fantastic community support, there are many pre-designed mounts available on file-sharing platforms such as thingiverse.com for the most common printers on the market.\u003c\/p\u003e\n\u003cp\u003eBy using Titan’s custom engineering and rigorously tested extrusion system, Aero is highly reliable and retains all the smart usability features. It’s a breeze to load and unload filament, manually extrude, adjust idler tension, and clean out debris from the hobb.\u003c\/p\u003e\n\u003cp\u003eThe use of Titan’s 3:1 gearing ratio pairs it perfectly with the compact but powerful motor, making for a lighter weight carriage whilst maintaining reliability and pushing power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- Direct drive\u003c\/p\u003e\n\u003cp\u003e- Maximum printing temperature: 285ºC\u003c\/p\u003e\n\u003cp\u003e- All metal heatbreak\u003c\/p\u003e\n\u003cp\u003e- 3:1 gearing ratio\u003c\/p\u003e\n\u003cp\u003e- Ecosystem compatible\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKit contains:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- x 1 Titan Aero HeatSink 1.75 mm or 2.85 mm Standard or mirrored\u003c\/p\u003e\n\u003cp\u003e- x 1 Titan main body standard or mirrored\u003c\/p\u003e\n\u003cp\u003e- x 1 Titan Hobb stainless steel\u003c\/p\u003e\n\u003cp\u003e- x 1 Titan extruder fixings bag\u003c\/p\u003e\n\u003cp\u003e- x 1 Titan Aero Fan fixings bag\u003c\/p\u003e\n\u003cp\u003e- x 1 40 x 40 x 10 Fan 12V or 24V\u003c\/p\u003e\n\u003cp\u003e- x 1 V6 aluminum HeaterBlock\u003c\/p\u003e\n\u003cp\u003e- x 1 V6 brass nozzle 1.75 mm or 2.85mm 0.4mm\u003c\/p\u003e\n\u003cp\u003e- x 1 Stainless steel HeatBreak 1.75mm or 2.85mm\u003c\/p\u003e\n\u003cp\u003e- x 1 Idler lever\u003c\/p\u003e\n\u003cp\u003e- x 1 Thermal paste\u003c\/p\u003e\n\u003cp\u003e- x 1 PTFE tube 100mm 1.75mm\u003c\/p\u003e\n\u003cp\u003e- x 1 Thermistor cartridge\u003c\/p\u003e\n\u003cp\u003e- x 1 Thermistor extension cable\u003c\/p\u003e\n\u003cp\u003e- x 1 30W heater cartridge 12V or 24V\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Standard \/ 24V \/ No Motor","offer_id":50163815907606,"sku":"TITAN-AERO-ST-175-24V","price":59.97,"currency_code":"USD","in_stock":false},{"title":"Mirrored \/ 12V \/ No Motor","offer_id":50163815940374,"sku":"TITAN-AERO-MIR-175-12V","price":49.97,"currency_code":"USD","in_stock":false},{"title":"Mirrored \/ 24V \/ Compact But Powerful Motor","offer_id":50163815973142,"sku":"TITAN-AERO-MIR-175-24V-+MTR","price":79.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/E3D-Titan-Aero-Full-Kit-HartSmart-Products-24944674.png?v=1765323248"},{"product_id":"e3d-hemera-toolchanger-direct-tool-1-75mm","title":"E3D Hemera ToolChanger Direct Tool (1.75mm)","description":"\u003ch3\u003e\n\u003cstrong\u003e1.75mm Tools for the E3D Toolchanger System\u003c\/strong\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eIf you're looking for a lightweight tool solution then our V6 and Volcano Tools are an excellent choice for a nimble Bowden ToolHead. Or if you're after more control authority then opt for a direct drive Hemera tool. All include a docking bracket.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eToolChanger Bowden Tools\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThe classic E3D performance you are accustomed to, with the additional benefit of a threaded heatsink for a more compact, sturdier tool. Available with either an aluminum V6 or Volcano HeaterBlock. \u003cspan data-mce-fragment=\"1\"\u003eThe \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" style=\"color: #00aaff;\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/e3d-online.com\/collections\/extruders\/products\/titan-extruder\" style=\"color: #00aaff;\" target=\"_blank\" data-mce-href=\"https:\/\/e3d-online.com\/collections\/extruders\/products\/titan-extruder\"\u003eextruder\u003c\/a\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e and\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\" style=\"color: #00aaff;\"\u003e \u003ca data-mce-fragment=\"1\" href=\"https:\/\/e3d-online.com\/products\/ptfe-bowden-tubing-100mm-1-75mm-filament\" style=\"color: #00aaff;\" target=\"_blank\" data-mce-href=\"https:\/\/e3d-online.com\/products\/ptfe-bowden-tubing-100mm-1-75mm-filament\"\u003ePTFE\u003c\/a\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e (20 x units per tool) are not supplied with these tools, you will need to purchase them separately. Please note you will need to print \u003ca href=\"https:\/\/github.com\/e3donline\/ToolChanger\/tree\/master\/V6%20Tool\" title=\"V6 Tool Printed Parts\" target=\"_blank\"\u003ethese\u003c\/a\u003e additional parts for the full assembly.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eToolChanger Direct Tool\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLeverage the full power of Hemera with direct drive toolheads, providing top class filament control with short filaments paths and uncompromising grip with dual drive hobbs. Perfect for challenging materials such as TPE's and TPU's. Comes with the extruder and PTFE. Please note you will need to print \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4008778\"\u003ethese\u003c\/a\u003e additional parts for the full assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCompatibility \u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eThese kits maintain full compatibility with V6, Volcano or SuperVolcano HeaterBlocks for a versatile system capable of printing with different nozzle sizes within one print.\u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cb\u003e\u003cstrong\u003eHemera Direct Tool includes:\u003c\/strong\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Assembled ToolPlate\u003c\/li\u003e\n\u003cli\u003e1 x POM receiver \u003c\/li\u003e\n\u003cli\u003e1 x Hemera HotEnd (24V)\u003c\/li\u003e\n\u003cli\u003e20 x Units of PTFE tubing \u003c\/li\u003e\n\u003cli\u003e1 x Part cooling fan\u003c\/li\u003e\n\u003cli\u003e1 x Thermistor cartridge \u003c\/li\u003e\n\u003cli\u003e1 x Brass nozzle V6 1.75 mm 0.4 mm \u003c\/li\u003e\n\u003cli\u003e1 x High Precision 30W 24V heater \u003c\/li\u003e\n\u003cli\u003e1 x Tool fixings kit \u003c\/li\u003e\n\u003cli\u003e1 x Dock bracket \u003c\/li\u003e\n\u003cli\u003e1 x Dock pins\u003c\/li\u003e\n\u003cli\u003e1 x Dock fixings kit \u003c\/li\u003e\n\u003cli\u003e1 x PCB connector board\u003c\/li\u003e\n\u003cli\u003e1 x Extension cable \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HartSmart Products","offers":[{"title":"Hemera Direct Tool (+Extruder)","offer_id":50163814465814,"sku":"TC-TOOL-HEMERA","price":129.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/E3D-Hemera-ToolChanger-Direct-Tool-_1.75mm_-HartSmart-Products-24946475.jpg?v=1765323264"},{"product_id":"3d-printlife-biopetg","title":"3D Printlife BioPETG","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e3D Printlife BioPETG\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBioPETG is a professional grade PETG specially formulated to be consumed by bacteria once it enters a landfill to energy facility or a commercial compost. 3D Printlife's proprietary bio-additive technology simply provides a food source for the bacteria living in those environments. BioPETG maintains the strength, heat resistance, printing characteristics, and post-process capabilities of PETG in every way.\u003c\/p\u003e\n\u003ch4\u003e\u003cstrong\u003eHow does BioPETG work?\u003c\/strong\u003e\u003c\/h4\u003e\n\u003cp\u003eBioPETG meets both \u003ca href=\"https:\/\/www.astm.org\/Standards\/D5338.htm\" class=\"waffle-rich-text-link\"\u003eASTM D5338\u003c\/a\u003e \u0026amp;\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.astm.org\/d5511-18.html\"\u003eD5511\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003estandards for biodegradability.  \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.astm.org\/Standards\/D5338.htm\" class=\"waffle-rich-text-link\"\u003eASTM D5338\u003c\/a\u003e determines the degree and rate of aerobic biodegradation of plastic materials by measuring a percentage of conversion of carbon in the sample to carbon dioxide.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.astm.org\/d5511-18.html\"\u003eASTM D5511\u003c\/a\u003e measures anerobic biodegradation.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/www.3dprintlife.com\/media\/wysiwyg\/CO2_Production_Chart.jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003e(Average results of combined tests)\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBioPETG™ combines many of the benefits of ABS with the ease of printing associated with PLA in one material:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh impact resistance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh strength and durability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExcellent layer adhesion\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExcellent pliability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eVery low shrinkage, therefore little to no warping making it deal for large prints\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSmooth finish\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo heated bed required\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHigh temperature resistance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOdorless printing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExcellent chemical and water resistance\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eExcellent geometric accuracy\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCan be sterilized\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStrong but flexible (ideal for drones, mechanical parts, \u0026amp; robotics)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFDA compliant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs with all materials there is a settings \"sweet spot\" that will vary from one printer to another. BioPETG™ is no different, but once you're dialed in printing with BioPETG™ is a dream. Here are some general setting guidelines:\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSet your nozzle temperature between 235°C and 250°C.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrint with cooling fan at 100%\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eA heated bed is not required but start between 70°C - 80°C if available.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSet print speed around 55mm\/sec or less.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTry starting with an additional .2mm gap in the Z axis to avoid skimming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNozzle Temp:\u003cspan\u003e \u003cmeta charset=\"utf-8\"\u003e235℃ - 255℃\u003c\/span\u003e\u003cbr\u003eBed Temp:\u003cspan\u003e \u003cmeta charset=\"utf-8\"\u003e0°C - 80°C\u003c\/span\u003e\u003cbr\u003eBed Surface: Glass, Painter's Tape, BuildTak, PEI\u003cbr\u003ePrint Speed: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e≤ 55mm\/s\u003c\/span\u003e\u003cbr\u003eFan Speed: 100%\u003cbr\u003eFlow Rate: \u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e110.%\u003c\/span\u003e\u003cbr\u003eSpool Weight: 750g\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ Black \/ 750g","offer_id":50163815285014,"sku":"BPETG175BLK","price":36.0,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ White \/ 750g","offer_id":50163815317782,"sku":"BPETG175WHT","price":36.0,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ Clear \/ 750g","offer_id":50163815350550,"sku":"BPETG175CLR","price":36.0,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ Blue \/ 750g","offer_id":50163815383318,"sku":"BPETG175BLU","price":36.0,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ Red \/ 750g","offer_id":50163815416086,"sku":"BPETG175RED","price":36.0,"currency_code":"USD","in_stock":false},{"title":"2.85mm \/ Black \/ 750g","offer_id":50163815448854,"sku":"BPETG285BLK","price":36.0,"currency_code":"USD","in_stock":false},{"title":"2.85mm \/ White \/ 750g","offer_id":50163815481622,"sku":"BPETG285WHT","price":36.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/3D-Printlife-BioPETG-HartSmart-Products-24947482.jpg?v=1765323274"},{"product_id":"ender-3-v2-replacement-hotend-assembled","title":"Ender-3 V2 Replacement Hotend (Assembled)","description":"\u003ch3\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cb\u003e\u003c\/b\u003eGenuine Creality MK8 Hotend\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eFully assembled MK8 hotend for Ender-3 V2\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e100% brand new and fully assembled so you can install it on your machine quickly and easily.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003eThis MK8 assembled extruder hot end kit is compatible with the Ender-3\/Ender-3s\/Ender-3 Pro\u003cbr\u003eComes with 0.4mm Nozzle, Aluminum Heat Block, Heat Sink, PTFE Tube, Heater Cartridge, Thermistor with Pin Head and Throat Pipe, fully assembled, easy to install.\u003cbr\u003eWhite wire with pin head is the Thermistor, red wire is the Heater Cartridge (24V 40W).\u003cbr\u003e100% official Creality 3D product\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003eWorks With: Ender-3 V2, Ender-3, Ender 3 Pro\u003cbr\u003eNozzle Size: 0.4mm\u003cbr\u003eTube Length: Approx. 37cm Long\u003cbr\u003eThermistor and Cable Length: 130cm\u003cbr\u003eThroat Pipe Length: 30mm\u003cbr\u003eAluminum Block Size: Approx. 20 * 20 * 10mm\u003cbr\u003eOperating Temperature Range: -40~+260°C (-40~+500°F)\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163815252246,"sku":"4001030041","price":14.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Ender-3-V2-Replacement-Hotend-_Assembled_-HartSmart-Products-24948553.jpg?v=1765323287"},{"product_id":"supervolcano-nozzles-brass","title":"SuperVolcano Nozzles - Brass","description":"\u003ch3\u003e\u003cspan\u003eE3D SuperVolcano Nozzles\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eHigh-performance \u003cstrong\u003ebrass nozzles for your SuperVolcano HotEnd\u003c\/strong\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFrom super-fine to super-fat layering, you'll be making stronger, faster, and bigger prints in no time with the SuperVolcano HotEnd PowerUp!\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ 0.6mm","offer_id":50163815743766,"sku":"SUPER-NOZZLE-175-0600","price":19.97,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 0.8mm","offer_id":50163815776534,"sku":"SUPER-NOZZLE-175-0800","price":14.97,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1.0mm","offer_id":50163815809302,"sku":"SUPER-NOZZLE-175-1000","price":14.97,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1.2mm","offer_id":50163815842070,"sku":"SUPER-NOZZLE-175-1200","price":9.97,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1.4mm","offer_id":50163815874838,"sku":"SUPER-NOZZLE-175-1400","price":9.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/SuperVolcano-Nozzles-Brass-HartSmart-Products-24949563.jpg?v=1765323295"},{"product_id":"bondtech-lgx-secondary-gear","title":"Bondtech LGX Secondary Gear","description":"\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003eBondtech LGX™ Secondary Gear\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpare part made of self-lubricant high-temperature plastic to replace a secondary gear on a Bondtech LGX™ Large Gears eXtruder.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eFind the Bondtech LGX™ eXtruder \u003ca href=\"https:\/\/hartsmartproducts.com\/products\/lgx%E2%84%A2-large-gears-extruder\"\u003eHERE\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163813843222,"sku":"15071","price":4.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Bondtech-LGX-Secondary-Gear-HartSmart-Products-24950763.jpg?v=1765323318"},{"product_id":"e3d-hemera-bowden-adapter-bowdaptor","title":"E3D Hemera Bowden Adapter (Bowdaptor)","description":"\u003ch3\u003eE3D Hemera Bowdaptor\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eA bowdaptor (bowden adapter) kit to allow you to use E3D Hemera in a bowden configuration.\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163813712150,"sku":"HEMERA-175-BOWDAPTOR-KIT","price":5.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/E3D-Hemera-Bowden-Adapter-_Bowdaptor_-HartSmart-Products-24950854.jpg?v=1765323318"},{"product_id":"reflow-rpetg-pastel-collection","title":"Reflow rPETG - Pastel Collection","description":"\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003e\u003cimg alt=\"Reflow Filament Logo\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0085\/0506\/5530\/files\/reflow_logo_blue-uai-516x313_240x240.png?v=1593190214\"\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cstrong\u003eReflow's flagship R-PETG is sourced from leading local recyclers. It’s durable and easy to use, with exceptional visual and mechanical performance.\u003c\/strong\u003e\u003cbr\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eRecycled with care\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe tackle plastic pollution while you create beautiful work with no compromise on quality.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eOptimal performance\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe go the extra mile to make our materials universally compatible and offer you the support you need.\u003cbr\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003erPETG. The strong, silent type.\u003c\/u\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePETG is a Glycol Modified version of Polyethylene Terephthalate (PET). It has the best of both worlds, combining the functionality of ABS and the easy printing of PLA in one material. It’s also a highly common plastic in recycling ecosystems globally, so we can consistently source great quality streams.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGreat strength and impact resistance\u003c\/li\u003e\n\u003cli\u003eHigh-temperature tolerance\u003c\/li\u003e\n\u003cli\u003eExcellent visual qualities\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eSource Traceability\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePETG is an established plastic-type, frequently used in the production of beverage, food, and liquid containers. We source our rPETG from a highly consistent stream of high-quality medical waste, working with one of the most established recyclers in the EU.\u003cbr\u003e\u003cu\u003e\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e                                              \u003cstrong\u003e\u003cu\u003eThe Pastel Collection\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: center;\"\u003e\n\u003cp\u003eBrighten up your creations with our sustainable Pastel Collection, Aqua, Mint, Coral, and Honey. This set of vibrant colors complement each other beautifully and sit well with their more traditional family members, Jet Black, and Snow White. Perfect for turning your designs into a range of well balanced, eye-catching products.\u003c\/p\u003e\n\u003cdiv\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0085\/0506\/5530\/files\/colours-set-copy-min_480x480.jpg?v=1593190311\" alt=\"Reflow Filament The Pastel Collection\"\u003e\u003c\/div\u003e\n\u003cdiv\u003echeck out our \u003ca title=\"reflow collection\" href=\"https:\/\/hartsmartproducts.com\/search?q=reflow+filament\"\u003eother collections here! \u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ Aqua \/ 1kg","offer_id":50163816005910,"sku":"RPETG-PASTEL-AQUA-175","price":19.97,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ Coral \/ 1kg","offer_id":50163816071446,"sku":"RPETG-PASTEL-CORAL-175","price":19.97,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ Honey \/ 1kg","offer_id":50163816136982,"sku":"RPETG-PASTEL-HONEY-175","price":19.97,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ Mint \/ 1kg","offer_id":50163816202518,"sku":"RPETG-PASTEL-MINT-175","price":19.97,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ Black \/ 1kg","offer_id":50163816268054,"sku":"RPETG-PASTEL-BLACK-175","price":19.97,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ White \/ 1kg","offer_id":50163816333590,"sku":"RPETG-PASTEL-WHITE-175","price":19.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Reflow-rPETG-Pastel-Collection-HartSmart-Products-24950947.jpg?v=1765323321"},{"product_id":"toolchanger-dock-fixings-kit","title":"ToolChanger Dock + Fixings Kit","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eToolchanger Dock + Fixings kit \u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA replacement Toolchanger dock with an included fixing kit enabling you to replace a damaged dock or add the E3D docking standard to your own tool changing printer.\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163814072598,"sku":"TC-DOCK-KIT-V6","price":24.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/ToolChanger-Dock-_-Fixings-Kit-HartSmart-Products-24952854.jpg?v=1765323341"},{"product_id":"capricorn-xs-tubing","title":"Capricorn XS Tubing","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"ecwid-productBrowser-extraFields-center\"\u003e\n\u003cdiv style=\"text-align: center;\" class=\"ecwid-productBrowser-fieldRow-center\" itemprop=\"brand\" content=\"Capricorn\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0085\/0506\/5530\/files\/cover7_480x480.jpg?v=1607636381\" alt=\"\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"ecwid-productBrowser-fieldRow-center\" itemprop=\"brand\" content=\"Capricorn\"\u003e\u003c\/div\u003e\n\u003ch3 class=\"ecwid-productBrowser-fieldRow-center\" itemprop=\"brand\" content=\"Capricorn\"\u003e\u003cstrong\u003eCapricorn's flagship PTFE Tubing\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv class=\"ecwid-productBrowser-fieldRow-center\" itemprop=\"brand\" content=\"Capricorn\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"ecwid-productBrowser-fieldRow-center\" itemprop=\"brand\" content=\"Capricorn\"\u003eEnhanced with a proprietary blend of high performance additives.\u003c\/div\u003e\n\u003cdiv class=\"ecwid-productBrowser-fieldRow-center\" itemprop=\"brand\" content=\"Capricorn\"\u003e\n\u003cul\u003e\n\u003cli\u003e1.9mm inner, 4mm outer diameter for 1.75mm filaments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cspan\u003e3.2mm inner, 6.35mm outer diameter for 2.85mm filaments.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv tabindex=\"0\" class=\"gwt-HTML\" role=\"text\" itemprop=\"description\"\u003e\n\u003cdiv\u003eThis is, hands down, the single best PTFE Bowden tubing you can buy for your 3D printer.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eGuaranteed to always be the right diameter, and perfectly round. Print flexible filaments without the binding up that happens with over-diameter tubes.\u003c\/p\u003e\n\u003cdiv\u003eEach order of tubing comes with a Capricorn sticker to decorate your printer.\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eSold in increments of 1 Meter lengths (tubing will be cut to match the total quantity of tubing ordered). Don't forget to \u003ca href=\"https:\/\/hartsmartproducts.com\/collections\/vendors?q=Capricorn\" target=\"_blank\"\u003egrab some fittings\u003c\/a\u003e as well!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003eSee below for lengths needed to upgrade Modix Large-Format 3D printers (learn more about Modix printers \u003ca href=\"https:\/\/hartsmartproducts.com\/pages\/modix-machines\" target=\"_blank\"\u003eHERE\u003c\/a\u003e). Note: for machines with 2 print heads remember to get twice the suggested amount of tubing!\u003c\/div\u003e\n\u003cdiv\u003eBig-40: 2 Meters\u003c\/div\u003e\n\u003cdiv\u003eBig-60: 2 Meters\u003c\/div\u003e\n\u003cdiv\u003eBig-120X: 3 Meters\u003c\/div\u003e\n\u003cdiv\u003eBig-120Z: 3 Meters\u003c\/div\u003e\n\u003cdiv\u003eBig-180X: 3 Meters\u003c\/div\u003e\n\u003cdiv\u003eBig-Meter: 3 Meters\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cspan style=\"text-decoration: underline;\"\u003eSpecifications\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ctable data-mce-fragment=\"1\"\u003e\n\u003ctbody data-mce-fragment=\"1\"\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 207px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tableheaders\" style=\"width: 307px;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePremium XS Series Dark Blue Tubing\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eAdditives\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003eBlue Color and Secret High Lubricity Additive Mixture\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eBest For Chunky Filaments\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003eYES\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eBest For Flexible Filaments\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003eYES\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eCan See Through\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003eNO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003ePulling Friction\u003csup data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.captubes.com\/shop\/#friction\" data-mce-href=\"https:\/\/www.captubes.com\/shop\/#friction\"\u003e♠\u003c\/a\u003e\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003e0.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eColor\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003eDark Blue\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eDensity (kg\/m3)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003e2300 +\/-100\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eHardness\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003e60-65\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eInner Diameter (mm)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003e1.90 or 3.20 +\/- 0.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eLinear Thermal Expansion at 250 °C\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003e2.2-3.3%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eMaterial\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003eHighest Quality Pure Virgin PTFE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eMelting Point (°C)\u003csup data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.captubes.com\/shop\/#melting\" data-mce-href=\"https:\/\/www.captubes.com\/shop\/#melting\"\u003e♥\u003c\/a\u003e\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003eup to 340\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eOuter Diameter\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003e3.95 or 6.35 +\/- 0.05\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eRoundness (ϵ)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003e\u0026lt; 0.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eStiffness\u003csup data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.captubes.com\/shop\/#stiff\" data-mce-href=\"https:\/\/www.captubes.com\/shop\/#stiff\"\u003e§\u003c\/a\u003e\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003eMedium High\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eThermal Conductivity (W\/m-k)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003e0.25\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eWear Rate (gm\/s)\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003e0.01\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr data-mce-fragment=\"1\"\u003e\n\u003ctd data-mce-fragment=\"1\" style=\"width: 0px;\"\u003e\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"columnheaders\" style=\"width: 207px;\"\u003eYoung's Modulus (GPa)\u003csup data-mce-fragment=\"1\"\u003e\u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.captubes.com\/shop\/#ym\" data-mce-href=\"https:\/\/www.captubes.com\/shop\/#ym\"\u003e¥\u003c\/a\u003e\u003c\/sup\u003e\n\u003c\/td\u003e\n\u003ctd data-mce-fragment=\"1\" class=\"tablecells\" style=\"width: 307px;\"\u003e0.53\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003cmeta charset=\"utf-8\"\u003e\u003csup data-mce-fragment=\"1\"\u003e♠\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003ePulling Friction is calculated as the average force required to pull 1.2 meters of 1.75mm PLA filament through 1 meter of tubing at a constant speed, relative to 1 meter of cheap white reference tubing. Note that although we observed the friction of the TL series to be about the same or even slightly lower than our XS series, it also has a larger internal diameter.\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003csup\u003e§\u003c\/sup\u003eOther Bowden tubes may vary significantly in stiffness, depending on the material from which they're made. Our tubing generally tends to be more flexible than most, with the TL being more flexible than XS.\u003cbr\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003csup\u003e¥\u003c\/sup\u003eYoung's Modulus (YM) is the measure of elasticity of the material. Our XS Series additives give the PTFE a slightly greater YM than the TL Series.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e \u003csup data-mce-fragment=\"1\"\u003e♥\u003c\/sup\u003eTemperatures were approximated by heating samples of all tubing simultaneously, observing how quickly each one began to deform. Printer failures may happen at significantly lower temperatures.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003ePrinting high temperature materials may create dangerous off-gassing. Please refer to the \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.captubes.com\/safety.html\" data-mce-href=\"https:\/\/www.captubes.com\/safety.html\"\u003eSafety Page.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ 1 Meter","offer_id":50163814826262,"sku":"CAP-XS-175-1METER","price":11.99,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 1 Meter","offer_id":50163814859030,"sku":"CAP-XS-285-1METER","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Capricorn-XS-Tubing-HartSmart-Products-24952979.jpg?v=1765323343"},{"product_id":"desiccant-for-filament-storage-100g-pack","title":"Desiccant for Filament Storage - 100g Pack","description":"\u003ch3\u003e100g Reusable Desiccant Pack for Filament Storage Boxes\u003c\/h3\u003e\n\u003cp\u003eKeep your filament nice and dry in a storage tote or dry box using this DryTote desiccant pack. Easily see when the desiccant pack has been saturated and needs to be recharged by looking at the blue square. If the square turns Pink then it's time to recharge it. \u003c\/p\u003e\n\u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eULTIMATE MOISTURE ABSORPTION: These rechargeable desiccant packs will absorb all the moisture from the air. It will help keep your filament dry and safe. It eliminates moisture even in very humid conditions.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eRECHARGE IN MINUTES: DryTote desiccant packs are rechargeable! After moisture absorption from the air, the blue color-changing dot on the front of the desiccant pack will turn pink. With the instructions, you can recharge the pack to blue in minutes!\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eSAFE STORAGE: DryTote desiccant packs create a protective environment with dry air for storage to prevent hydrolysis in any type of filament, including PLA, PETG, PCTG, ASA, TPU, PC, Nylon\/PA, and more.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003eLARGE CAPACITY: Simply place your items with desiccant packs in bins and totes up to 200 gallons in size. It’ll protect your items from moisture and other damages.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163816399126,"sku":"DSCT-100G","price":9.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Desiccant-for-Filament-Storage-100g-Pack-HartSmart-Products-24953689.jpg?v=1765323349"},{"product_id":"creality-all-metal-bowden-extruder-and-capricorn-tube-upgrade-pack","title":"Creality All-Metal Bowden Extruder and Capricorn Tube Upgrade Pack","description":"\u003ch3 class=\"product-title product_title entry-title\"\u003eCreality All Metal Extruder and Capricorn Teflon Tube Pack\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eCreality All Metal Extruder (Gray) and 1M Capricorn Bowden PTFE Tubing 1.75mm. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e3D Printer Accessories Kit with Pneumatic Coupler ​Silicone Sock for Ender-3 Series Ender-5 Series CR-10 Series\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163816464662,"sku":"4007010003","price":7.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Creality-All-Metal-Bowden-Extruder-and-Capricorn-Tube-Upgrade-Pack-HartSmart-Products-24954080.png?v=1765323353"},{"product_id":"modix-big-60-v3-3d-printer-hartsmart-products-refurbished","title":"Modix Big-60 V3 3D Printer - HartSmart Products Refurbished","description":"\u003ch3\u003eRefurbished Modix Big-60 V3 3D Printer\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cp\u003eThis is a machine from one of our customers who traded it in for credit toward one of our \u003ca href=\"hspprinters.com\" rel=\"noopener\" target=\"_blank\"\u003eHSP1-I industrial 3D printers\u003c\/a\u003e. The Big-60 is fully assembled and works great. They were using it right up until we delivered their HSP1-I. The Modix Big-60 is originally a kit machine, requiring the user to put it together, calibrate it, and get it working. This one is fully assembled and has multiple upgrades installed on it as well. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis printer has a build volume of 600mm x 600mm x 600mm.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eStock Configuration:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBig-60 V3 Base Kit\u003c\/li\u003e\n\u003cli\u003eBig-60 Enclosure\u003c\/li\u003e\n\u003cli\u003eBig-60 Secondary Printhead (Dual Material)\u003c\/li\u003e\n\u003cli\u003eCasters\u003c\/li\u003e\n\u003cli\u003eFilament Sensors (Clog detection on primary, filament detection on secondary)\u003c\/li\u003e\n\u003cli\u003eCrash Detection Sensor\u003c\/li\u003e\n\u003cli\u003eMagnetic PEI Bed\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAftermarket Upgrades \u0026amp; Improvements:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUpgraded Nozzle Heaters\u003c\/li\u003e\n\u003cli\u003eUpgraded Bed Heater\u003c\/li\u003e\n\u003cli\u003eUpgraded Lid Hinges\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e The machine is located in Des Moines, IA USA. Shipping method is up to the buyer to handle. We will palletize it and pack it up for freight shipping.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIf interested, please contact us \u003ca href=\"https:\/\/hartsmartproducts.com\/pages\/contact-us\"\u003eHERE\u003c\/a\u003e.\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163816431894,"sku":"sku-46070176973021","price":3499.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Modix-Big-60-V3-3D-Printer-HartSmart-Products-Refurbished-HartSmart-Products-24954732.jpg?v=1765323362"},{"product_id":"jabil-0800-esd-safe-petg","title":"Jabil 0800 ESD-Safe PETG","description":"\u003ch3\u003eJabil 0800 ESD-Safe PETG Filament\u003c\/h3\u003e\n\u003cp\u003eJabil Engineered Materials PETG 0800 ESD is an easy processing, electrostatic dissipative (ESD) product for printing parts that require protection from electrostatic discharge. This product has high strength and stiffness with a good balance of properties in XY and Z directions and the added benefit of ESD for jigs, fixtures and tooling that needs to safely handle electronic components.\u003c\/p\u003e\n\u003cp\u003ePETg 0800 ESD filaments are easy processing and electrostatic dissipative (ESD) with a good balance of properties in XY and XYZ directions. This filament provides excellent toughness and durability.\u003c\/p\u003e\n\u003ch3\u003eSPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTensile Modulus: 248 psi\u003c\/li\u003e\n\u003cli\u003eTensile Elongation at Break: 11%\u003c\/li\u003e\n\u003cli\u003eUltimate Tensile Strength: 6800 psi\u003c\/li\u003e\n\u003cli\u003eFlexural  Modulus: 245 ksi\u003c\/li\u003e\n\u003cli\u003eFlexural Strength: 10000\u003c\/li\u003e\n\u003cli\u003eDeflection Temp: 71C\u003c\/li\u003e\n\u003cli\u003eDensity 1.26 g\/cm^3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/file\/d\/1E0FINZeHQCPr-ldn5S1BfQPq22cefFv8\/view?usp=sharing\" target=\"_blank\"\u003eTechnical Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eInterested in a bulk purchase? Inquire here for special bulk pricing: \u003ca href=\"https:\/\/hartsmartproducts.com\/pages\/contact-us\" target=\"_blank\"\u003eCONTACT US\u003c\/a\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"2.85mm \/ Black \/ 1kg","offer_id":50163816497430,"sku":"JABIL-ESDPETG285","price":19.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Jabil-0800-ESD-Safe-PETG-HartSmart-Products-24955371.webp?v=1765323364"},{"product_id":"jabil-abs-1400-low-warp-filament","title":"Jabil ABS 1400 Low Warp Filament","description":"\u003ch3\u003eJabil ABS 1400 LW Filament\u003c\/h3\u003e\n\u003cp\u003eABS 1400 LW is an easy-to-print material and delivers more durable and heat resistant parts than PLA while also minimizing warping. Parts have excellent surface appearance and support multiple post-process options such as vapor smoothing.\u003c\/p\u003e\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGood layer-to-layer adhesion\u003c\/li\u003e\n\u003cli\u003eMore durable and heat resistant than PLA\u003c\/li\u003e\n\u003cli\u003eStiffer than most ABS filament\u003c\/li\u003e\n\u003cli\u003eReduced CLTE (continuous level, linear thermal expansion)\u003c\/li\u003e\n\u003cli\u003eImproved dimensional stability\u003c\/li\u003e\n\u003cli\u003eStands up to finishing processes such as vapor polish, sanding, dyeing, painting, and adding a gloss finish\u003c\/li\u003e\n\u003cli\u003eGood chemical resistance to most fluids\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMinimal warping when printed with 100% infill in a non-heated chamber system\u003c\/li\u003e\n\u003cli\u003eCan be used with direct drive or Bowden tube 3D printers\u003c\/li\u003e\n\u003cli\u003eExcellent bed adhesion\u003c\/li\u003e\n\u003cli\u003eConsistent lot-to-lot print properties\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eApplications where properties of ABS are wanted, but low warp is required\u003c\/li\u003e\n\u003cli\u003ePrototypes and parts that require enhanced durability\u003c\/li\u003e\n\u003cli\u003eExamples include:\n\u003cul\u003e\n\u003cli\u003eBrackets\u003c\/li\u003e\n\u003cli\u003eHousings\u003c\/li\u003e\n\u003cli\u003eJig, fixtures, and tooling to aid in manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIndustries\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive\u003c\/li\u003e\n\u003cli\u003eAerospace\u003c\/li\u003e\n\u003cli\u003eGeneral manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/drive.google.com\/file\/d\/1ElygK24sh4APLhbLON5FCFpfcABFp5tL\/view?usp=sharing\" target=\"_blank\"\u003eTechnical Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/drive.google.com\/file\/d\/1ErkTJkjXn2aO4T1auqia2wDzxLaPtW7_\/view?usp=sharing\" target=\"_blank\"\u003ePrinting \u0026amp; Drying Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eInterested in a bulk purchase? Inquire here for special bulk pricing: \u003ca href=\"https:\/\/hartsmartproducts.com\/pages\/contact-us\" target=\"_blank\"\u003eCONTACT US\u003c\/a\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ Natural \/ 1kg","offer_id":50163816530198,"sku":"JABIL-ABS1400LW-NTL","price":14.97,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ Black \/ 1kg","offer_id":50163816595734,"sku":"JABIL-ABS1400LW-BLACK","price":14.97,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ Natural \/ 1kg","offer_id":50163816562966,"sku":"JABIL-ABS1400LW-NTL285","price":9.97,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ Black \/ 1kg","offer_id":50163816628502,"sku":"JABIL-ABS1400LW-BLACK285","price":9.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Jabil-ABS-1400-Low-Warp-Filament-HartSmart-Products-24955663.webp?v=1765323366"},{"product_id":"jabil-tpe-sebs-1300","title":"Jabil TPE SEBS 1300","description":"\u003ch3\u003eJabil SEBS 1300 TPE Filament\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eTPE SEBS is a soft material very similar to TPU which is great for prototyping where rubber-like or elastomeric properties and durability are required. TPE SEBS 1300 95A is slightly firmer than TPE SEBS 1300 85A for application requirements that call for flexibility but also need more rigidity to achieve the optimal finished part performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll spools contain 1kg of filament.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eMaterial\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShore Hardness of 85A or 95A elastomer\u003c\/li\u003e\n\u003cli\u003eHigh flexibility, bend and stretch\u003c\/li\u003e\n\u003cli\u003eNon-hygroscopic, does not absorb moisture \u003c\/li\u003e\n\u003cli\u003eDurable with repetitive motions\u003c\/li\u003e\n\u003cli\u003eLess visible layer lines\u003c\/li\u003e\n\u003cli\u003eLess warp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003ePrinting\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWorks on all open-platform, direct-drive 3D printers, can be used on direct-drive configurations\u003c\/li\u003e\n\u003cli\u003eHigh print success rates\u003c\/li\u003e\n\u003cli\u003eVery low warpage and curl\u003c\/li\u003e\n\u003cli\u003eExcellent bed adhesion\u003c\/li\u003e\n\u003cli\u003eNo need for heated print bed\u003c\/li\u003e\n\u003cli\u003eNo drying required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eParts that require toughness and resilience as well as some flexibility and fatigue resistance along with elastomeric properties that can bend, flex and stretch\u003c\/li\u003e\n\u003cli\u003eComplex geometries\u003c\/li\u003e\n\u003cli\u003eExamples include:\n\u003cul\u003e\n\u003cli\u003eAutomotive interior trim components\u003c\/li\u003e\n\u003cli\u003ePackaging closures\u003c\/li\u003e\n\u003cli\u003eCovers and housings\u003c\/li\u003e\n\u003cli\u003eGrips\u003c\/li\u003e\n\u003cli\u003eNo slip feet for electronic and mechanical components\u003c\/li\u003e\n\u003cli\u003eGap seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIndustries\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive\u003c\/li\u003e\n\u003cli\u003eAerospace\u003c\/li\u003e\n\u003cli\u003eGeneral manufacturing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/file\/d\/1EyzCGL5iJc1wSpuCpUz2q56XuIjjJhxd\/view?usp=sharing\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eTechnical Datasheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/drive.google.com\/file\/d\/1Eylr_uTT4GcNoZxWDF4PB4IUEEIYRprT\/view?usp=sharing\" rel=\"noopener noreferrer\" target=\"_blank\"\u003ePrinting \u0026amp; Drying Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eInterested in a bulk purchase? Inquire here for special bulk pricing: \u003ca href=\"https:\/\/hartsmartproducts.com\/pages\/contact-us\" target=\"_blank\"\u003eCONTACT US\u003c\/a\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ 95A \/ Natural","offer_id":50163816661270,"sku":"JABIL-SEBS1300-NTL","price":29.97,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 95A \/ Black","offer_id":50163816694038,"sku":"JABIL-SEBS1300-BLACK","price":29.97,"currency_code":"USD","in_stock":false},{"title":"2.85mm \/ 95A \/ Natural","offer_id":50163816726806,"sku":"JABIL-SEBS13000-NTL285","price":19.97,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 95A \/ Black","offer_id":50163816759574,"sku":"JABIL-SEBS13000-BLACK285","price":19.97,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 85A \/ Natural","offer_id":50163816792342,"sku":"JA3D-C1001093","price":19.97,"currency_code":"USD","in_stock":true},{"title":"2.85mm \/ 85A \/ Black","offer_id":50163816825110,"sku":"JA3D-C1001135","price":19.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Jabil-TPE-SEBS-1300-HartSmart-Products-24956059.webp?v=1765323370"},{"product_id":"bondtech-lgx-primary-gear","title":"Bondtech LGX Primary Gear","description":"\u003ch3\u003e\u003cspan data-mce-fragment=\"1\"\u003eBondtech \u003cmeta charset=\"utf-8\"\u003eLGX™ Primary Gear\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eSpare part made of self lubricant high temperature plastic to replace a primary gear on a Bondtech LGX™ Large Gears eXtruder.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eFind the Bondtech LGX eXtruder \u003ca href=\"https:\/\/hartsmartproducts.com\/products\/lgx%E2%84%A2-large-gears-extruder\"\u003eHERE\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163816857878,"sku":"15070","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Bondtech-LGX-Primary-Gear-HartSmart-Products-24956443.jpg?v=1765323374"},{"product_id":"lgx-steel-drive-train-upgrade-set","title":"LGX Steel Drive Train Upgrade Set","description":"\u003ch3\u003eBondtech LGX Steel Drive Train Upgrade Set\u003c\/h3\u003e\n\u003cp\u003eSet of parts made of Hardened Steel to replace the plastic Drive and Main Double Gears on a Bondtech Large Gears eXtruder:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cb\u003eLGX\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eLGX Lite\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb\u003eLGX Lite Mirrored\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eRecommended to feed Engineering grade thermoplastics.\u003c\/h5\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163816956182,"sku":"15147","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/LGX-Steel-Drive-Train-Upgrade-Set-HartSmart-Products-24956593.jpg?v=1765323378"},{"product_id":"filamentone-pla-pro-select-silk","title":"FilamentOne PLA PRO SELECT Silk","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePLA PRO SELECT\u003c\/strong\u003e\u003cspan\u003e \u003cstrong\u003eSilk\u003c\/strong\u003e \u003c\/span\u003eby FilamentOne is a\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003epremium\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e3D printing material for FDM 3D printers.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe advantage of this material is that it can be easily used in 3D printers, allowing high quality printing, resulting in excellent detail and lamination of the printed object.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003eManufacturing Precision\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e+\/- 0.02 mm\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cspan\u003eWorking Temperature\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e205 - 225 °C\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cspan\u003eHeatbed\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e35 - 60 °C \u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cspan\u003eWeight\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cdiv\u003e\u003cstrong\u003e1 KG\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003ch3\u003ePLA PRO SELECT Silk Features\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSmooth and shiny surface finish\u003c\/li\u003e\n\u003cli\u003eHard and Tough\u003c\/li\u003e\n\u003cli\u003eLess brittle than regular PLA\u003c\/li\u003e\n\u003cli\u003eEasy to print\u003c\/li\u003e\n\u003cli\u003eLow warping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe guarantee precision dimensions of our filaments having +\/- 0.02 mm tolerance, strictly controlled throughout the production.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOur filaments are produced in a wide variety of colors within the color charts RAL and Pantone. We also produce custom colors. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003eAbout PLA\u003c\/h3\u003e\n\u003cp\u003ePLA (Polylactic acid) is biodegradable and very strong material. It is the best material for printing large or small parts. That is possible thanks to it’s very low thermal expansion. PLA is one of the most popular materials for 3D printing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003ePrinting of large parts is much easier with almost no warping \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003eNo chemical odors are produced during printing\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003eLow temperature resistance \u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003cspan\u003eNot suitable for outside use\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ Silk Blue \/ 10kg","offer_id":50163816890646,"sku":"F1-PLAPROSLK-BLUE-10","price":75.0,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ Silk Yellow \/ 10kg","offer_id":50163816923414,"sku":"F1-PLAPROSLK-YELLOW-10","price":75.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/FilamentOne-PLA-PRO-SELECT-Silk-HartSmart-Products-24956889.jpg?v=1765323381"},{"product_id":"e3d-revo-cr-hotend-for-creality","title":"E3D Revo CR Hotend for Creality","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eE3D Revo CR\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUpgrade your Creality 3D printer to Revo so you can change nozzles cold without special tools and hot tightening hassles.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNo extra mounts or adapters needed: Pre-drilled M3 clearance holes match Creality’s X carriage mounting pattern for easy installation.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eNo firmware tweaks: This kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIncludes solderless, crimp-less, butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDetailed [upgrade guides] created by us help you get 3D printing quickly\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCreality mounting holes.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eConvenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts!\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eEasy nozzle swaps.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eA variety of Revo Nozzles enhance the capabilities of your 3D printer without difficult nozzle-changing processes. Every Revo Nozzle can be changed by hand. No tools, no hot tightening.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSimple, hassle-free connection.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eWe’ve included some solderless, crimpless, butt splice connectors for easy connection to help you get up and running quickly without having to undo your entire wiring bundle.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBetter reliability.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eRevo Nozzles are factory sealed, so there’s much less chance of nozzle leaks, and no hot tightening is needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eBetter efficiency.\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eThe included Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock HotEnd. Start 3D printing right away without annoying firmware adjustments: we’ve integrated a 100K NTC thermistor into this special HeaterCore. This thermistor has the same response as the stock HotEnd, so no firmware tweaks are needed. Better safety. Thanks to the built-in PTC behavior of the heaterCore, Revo CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"24V \/ Fully Loaded Kit","offer_id":50163817054486,"sku":"REVO-CREALITY-175-24V-AS-FL","price":130.99,"currency_code":"USD","in_stock":false},{"title":"24V \/ Single Nozzle Kit","offer_id":50163817087254,"sku":"REVO-CREALITY-175-24V-AS","price":94.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/E3D-Revo-CR-Hotend-for-Creality-HartSmart-Products-24956973.webp?v=1765323383"},{"product_id":"direct-drive-kit-for-cr-10-ender-3","title":"Direct Drive Kit for CR-10\/Ender-3","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eMicro Swiss Direct Drive Extruder is a drop in system for CR-10 \/ Ender Printers\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo modification required, simple plug and play\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo printed brackets or sandwiches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDual-drive train\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHardened tool steel, CNC precision cut gears\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdjustable filament grip\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy filament loading\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShort, highly constrained filament path\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePrints flexible filaments with high speed and accuracy\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutstanding extrusion control\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLightweight aluminum body\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCR-10 (Will NOT directly fit CR10 V2, V3)\u003c\/li\u003e\n\u003cli\u003eCR-10-S5\u003c\/li\u003e\n\u003cli\u003eCR-10-S4\u003c\/li\u003e\n\u003cli\u003eCR-10S (Will NOT directly fit CR-10S Pro V2\u003cmeta charset=\"utf-8\"\u003e--*see note below)\u003c\/li\u003e\n\u003cli\u003eCR-10 MINI\u003c\/li\u003e\n\u003cli\u003eCR-20\u003c\/li\u003e\n\u003cli\u003eCR-20 Pro\u003c\/li\u003e\n\u003cli\u003eEnder-2\u003c\/li\u003e\n\u003cli\u003eEnder-3\u003c\/li\u003e\n\u003cli\u003eEnder-3 Pro\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eEnder-3 V2 *Fits V2 with printable\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.thingiverse.com\/thing:4408571\" target=\"_blank\"\u003eFan Shroud\u003c\/a\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e*For the CR-10S Pro V2, please order the extruder and CR-10S Pro hotend separately.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHotend for CR10s Pro V2: \u003ca href=\"https:\/\/hartsmartproducts.com\/collections\/3d-printer-parts\/products\/all-metal-hotend-kit-for-cr-10s-pro-cr-10-max\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eLINK\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e You will also need to print this fan shroud: \u003ca href=\"https:\/\/www.thingiverse.com\/thing:4893486\"\u003eLINK\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Instructions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003ca title=\"Micro Swiss Direct Drive Extruder Installation Instructions PDF\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1210\/0176\/files\/Micro_Swiss_Direct_Drive_Extruder_Installation_Instructions.pdf?v=1592671102\" target=\"_blank\"\u003eMicro Swiss Direct Drive Extruder Installation Instructions PDF\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cmeta charset=\"utf-8\"\u003e \u003ca title=\"Micro Swiss Direct Drive Extruder Installation Instructions Video\" href=\"https:\/\/youtu.be\/5mUT6dB5HcQ\" target=\"_blank\"\u003eMicro Swiss Direct Drive Extruder Installation Instructions Video\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAfter the installation, X and Y origins will be off the bed.\u003cbr\u003e\u003c\/span\u003e\u003cspan\u003e\u003cbr\u003eAdjustments procedure will depend on a type of the firmware and the setup you are currently using.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChose the setup you have:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1210\/0176\/files\/Without_Probe_Installed.pdf?v=1592670659\" target=\"_blank\"\u003e\u003cspan\u003eWithout any bed leveling probe installed\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1210\/0176\/files\/Leveling_probe_installed_with_generic_or_Creality_Marlin_Firmware.pdf?v=1594851559\" target=\"_blank\"\u003e\u003cspan\u003eLeveling probe installed with generic or Creality Marlin Firmware\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1210\/0176\/files\/Leveling_probe_installed_with_TH3D_Unified_Firmware.pdf?v=1594851705\" target=\"_blank\"\u003e\u003cspan\u003eLeveling probe installed with TH3D Unified Firmware\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/1u_HuSVjkn0\" height=\"840\" width=\"1792\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Hotend Included","offer_id":50163816988950,"sku":"M2601","price":79.97,"currency_code":"USD","in_stock":false},{"title":"Extruder Only","offer_id":50163817021718,"sku":"M2602","price":57.75,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Direct-Drive-Kit-for-CR-10-Ender-3-HartSmart-Products-24957413.png?v=1765323385"},{"product_id":"acf-film-for-mars-4-ultra-5-pcs","title":"ACF Film For Mars 4 Ultra (5 Pcs)","description":"\u003ch3\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eACF Film For Mars 4 Ultra (5 Pcs)\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv data-id=\"1688984298000\" data-ver=\"1\" data-icon=\"gpicon-textblock\" class=\"element-wrap\" id=\"e-1688984298000\" data-atomgroup=\"element\" data-key=\"text-block\" data-label=\"Text Block\"\u003e\n\u003cdiv data-gemlang=\"en\" class=\"elm text-edit gf-elm-left gf_gs-text-paragraph-1\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eMain Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv data-id=\"1688984298057\" data-ver=\"1\" data-icon=\"gpicon-textblock\" class=\"element-wrap\" id=\"e-1688984298057\" data-atomgroup=\"element\" data-key=\"text-block\" data-label=\"Text Block\"\u003e\n\u003cdiv data-exc=\"\" data-gemlang=\"en\" class=\"elm text-edit gf-elm-left gf_gs-text-paragraph-1 gf-elm-left-md gf-elm-left-sm gf-elm-left-xs gf-elm-left-lg\"\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with ELEGOO Mars 4 Ultra resin 3D printer. Film dimensions: 225*160mm; Film thickness: 0.3mm.\u003c\/li\u003e\n\u003cli\u003eOur ACF release film is made with composite technology, which prevents it from adhering to the LCD screen and affecting the release effect. It is distinguishable with one side frosted and the other side smooth, and the frosted side faces the direction of the LCD screen.\u003c\/li\u003e\n\u003cli\u003eOur resin 3D printer release liner film is highly resistant to chemicals and wear and UV stable, ensuring that it can withstand prolonged exposure to the UV light source without deteriorating.\u003c\/li\u003e\n\u003cli\u003eThe overall 0.3mm thickness prevents the release film from breaking during the printing process, ensuring that it is durable enough to withstand everyday use and maintain its quality for a long time.\u003c\/li\u003e\n\u003cli\u003eThe non-stick surface with less release tension is free from wrinkles, scratches, and bubbles, which ensures that your 3D printed models will easily come off the film without sticking or adhesion issues.\u003c\/li\u003e\n\u003cli\u003eOur ACF release liner film supports 3 times faster printing with RAPID resin, making the printing process more efficient and productive.\u003c\/li\u003e\n\u003cli\u003eWith 92% UV light transmittance, our ACF release film ensures faster and more accurate curing of your 3D printed models for a smooth surface.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cbr\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163817152790,"sku":"50.102.0098","price":34.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/ACF-Film-For-Mars-4-Ultra-_5-Pcs_-HartSmart-Products-24957821.webp?v=1765323390"},{"product_id":"magigoo-pro-flex","title":"Magigoo Pro Flex","description":"\u003ch3 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eMagigoo Pro Flex\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHAT:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eMagigoo Pro Flex is designed for professional use, to work exclusively with TPU (thermoplastic polyurethane), TPE (thermoplastic elastomer and TPC (thermoplastic copolyester) filaments. The part should be relatively easy to remove once it cools and the glue residue should also be easily cleaned off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eWHY:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eTPUs, TPEs\/TPCs describe a group of polymers which are sometimes referred to as thermoplastic rubbers. Thermoplastic rubbers exist as co-polymers or a polymer blend, generally of a plastic and a rubber. This imparts both thermoplastic and elastomeric properties. As a result these materials have the advantage of being able to stretch to moderate elongations and returning to the original shape.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAdditionally these materials have very good thermal properties, material stability, chemical resistance, and are more cost effective to produce. As a result these materials are highly sought in industrial applications.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSome flexible filaments show lower adhesion to conventional 3D-printing build surfaces and a high tendency to warp. Others tend to stick too well to bare 3D printing surfaces such as glass and PEI. Magigoo Pro Flex is a specialized solution for FDM printing of flexible filaments which was developed to work with a wide number of flexible filament types. Magigoo Pro Flex acts as an intermediate layer between the build-plate and the printed part enabling good adhesion and facilitating print removal as required.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eHOW: \u003c\/strong\u003eMagigoo Pro Flex has been designed and tested to work with different flexible filament brands.\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eShake\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003ethe bottle.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eApply\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto the desired area by pressing the nib on the bed (activating the inner valve) and spreading as needed.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003ePrint\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eaccording to the filament\/printer manufacturers recommendations\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eAllow to cool and Remove\u003c\/strong\u003e. The print should pop right off\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eClean\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e- Use a damp cloth to wipe off.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSAFETY: \u003c\/strong\u003eUsing this product with other than Flexible type filaments might cause over adhesion and damage your build surface.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eTips: \u003c\/strong\u003eFor larger prints and filaments with a high shrinkage rate, a 20 mm brim is recommended.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIn cases of excess adhesion, it is recommended to wet print bed with a small amount of water slowly work it below the part, this should make part removal easier.\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163817218326,"sku":"MF2019","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Magigoo-Pro-Flex-HartSmart-Products-24958238.webp?v=1765323393"},{"product_id":"filamentone-5015-cooling-fan-12v","title":"FilamentOne 5015 Cooling Fan (12V)","description":"\u003ch3\u003eFilamentOne 12V 5015 Cooling Fan\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Replacement fan for your 12V 3D printer. \u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eDimensions: 50mm x 50mm x 15mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eVoltage: 12VDC\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\"\u003e\u003cspan\u003eCurrent Draw: 0.20A\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eComes with a 1 meter extension wire with a 2-pin Dupont connector to work with most 3D printer control boards\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb id=\"docs-internal-guid-aaf3e64b-7fff-035e-1fc6-1e7eeb469035\"\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163817120022,"sku":"F1-5015-12V","price":1.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/FilamentOne-5015-Cooling-Fan-_12V_-HartSmart-Products-24958896.png?v=1765323399"},{"product_id":"supervolcano-nozzles-plated-copper","title":"SuperVolcano Nozzles - Plated Copper","description":"\u003ch3\u003e\u003cspan\u003eE3D Plated Copper SuperVolcano Nozzles\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eDurable, non-stick, extremely high-temperature performance SuperVolcano nozzles. Take your 3D printing to the next level by modifying your SuperVolcano with these nozzles. Made from a unique copper alloy, they will not begin to soften or anneal below 500°C, and they are highly resistant to debris and burnt-on plastic thanks to their nickel coating.\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ 0.6mm","offer_id":50163817382166,"sku":"SUPER-NOZZLE-COP-175-0600","price":19.97,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 0.8mm","offer_id":50163817414934,"sku":"SUPER-NOZZLE-COP-175-0800","price":19.97,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 1.0mm","offer_id":50163817447702,"sku":"SUPER-NOZZLE-COP-175-1000","price":19.97,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 1.2mm","offer_id":50163817480470,"sku":"SUPER-NOZZLE-COP-175-1200","price":19.97,"currency_code":"USD","in_stock":true},{"title":"1.75mm \/ 1.4mm","offer_id":50163817513238,"sku":"SUPER-NOZZLE-COP-175-1400","price":19.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/SuperVolcano-Nozzles-Plated-Copper-HartSmart-Products-24958972.jpg?v=1765323401"},{"product_id":"e3d-volcano-hotend","title":"E3D Volcano HotEnd","description":"\u003ch3\u003eE3D Volcano Hotend\u003c\/h3\u003e\n\u003cp\u003eThe Volcano HotEnd is E3D’s answer to slow printing. Boasting 3x the volumetric flow rate of the standard V6, Volcano enables its users to print bigger and stronger parts faster. If you've got a printer with a large build volume then the Volcano HotEnd is a must have.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eVolcano: Print Faster, Stronger, Bigger\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eMuch like the V6, Volcano is fully compatible with the E3D ecosystem and offers an assortment of different nozzle sizes. Users can print thick, strong layers with a 1.2mm nozzle or for higher precision prints opt for a 0.4mm nozzle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFaster\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThanks to its larger melt zone, Volcano enables users to print higher and wider tracks which results in dramatically reduced print times.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStronger\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn addition to reduced print time, the thick tracks printed by Volcano have greater interlayer adhesion and bond to one another with greatly improved strength. Parts printed are extremely strong, less brittle and feel much more sturdy than standard prints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBigger\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe size of printers is increasing and we now see machines that have the ability to create huge objects that push the limits of what we can print. However, printing these huge parts is incredibly slow and can take days which is simply impractical in many cases. The Volcano makes printing these objects much more efficient and can reduce print times by more than half.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eIncludes\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFull Hotends:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x V6 Heatsink 1.75\u003cspan\u003e \u003c\/span\u003edirect\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eor\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ebowden \u003c\/li\u003e\n\u003cli\u003e1 x Volcano aluminium HeaterBlock \u003c\/li\u003e\n\u003cli\u003e1 x Stainless steel HeatBreak 1.75mm \u003c\/li\u003e\n\u003cli\u003e1 x Brass volcano nozzle 0.8mm 1.75 mm\u003c\/li\u003e\n\u003cli\u003e1 x Heater cartridge 30W 24V\u003c\/li\u003e\n\u003cli\u003e1 x Thermistor cartridge\u003c\/li\u003e\n\u003cli\u003e1 x Thermistor extension cable \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Collet clip 1.75mm\u003c\/li\u003e\n\u003cli\u003e1 x V6 fixings kit \u003c\/li\u003e\n\u003cli\u003e1 x PTFE tube \u003c\/li\u003e\n\u003cli\u003e1 x V6 Fan duct \u003c\/li\u003e\n\u003cli\u003e1 x 30 x 30 x 10 mm fan 24V \u003c\/li\u003e\n\u003cli\u003e1 x M3 grub screw \u003c\/li\u003e\n\u003cli\u003e1 x M3 washer\u003c\/li\u003e\n\u003cli\u003e1 x Thermal paste\u003c\/li\u003e\n\u003cli\u003e1 x Volcano sock \u003c\/li\u003e\n\u003cli\u003e1 x Cable tie \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUpgrade Kit:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Volcano aluminium HeaterBlock \u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Brass volcano nozzle 0.8mm 1.75mm\u003c\/li\u003e\n\u003cli\u003e1 x Heater cartridge 30W 24V\u003c\/li\u003e\n\u003cli\u003e1 x Thermistor cartridge\u003c\/li\u003e\n\u003cli\u003e1 x Thermistor extension cable \u003c\/li\u003e\n\u003cli\u003e1 x V6 fixings kit \u003c\/li\u003e\n\u003cli\u003e1 x Cable tie \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eOther Volcano nozzles available \u003ca rel=\"noopener noreferrer\" href=\"https:\/\/hartsmartproducts.com\/search?q=Volcano+nozzle\" target=\"_blank\"\u003eHERE\u003c\/a\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"1.75mm \/ 24V \/ Fully Assembled Bowden - Full Hotend","offer_id":50163817251094,"sku":"VOLCANO-175-B-24V-AS","price":49.99,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 24V \/ Direct - Full Hotend","offer_id":50163817316630,"sku":"VOLCANO-175-24V","price":66.19,"currency_code":"USD","in_stock":false},{"title":"1.75mm \/ 24V \/ Volcano Upgrade Kit","offer_id":50163817349398,"sku":"VOLCANO-STARTER-24V-175","price":14.97,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/E3D-Volcano-HotEnd-HartSmart-Products-24960066.jpg?v=1765323411"},{"product_id":"magigoo-pro-pc","title":"Magigoo Pro PC","description":"\u003ch3\u003eMagigoo Pro PC - The 3D printing adhesive for Polycarbonate\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/h3\u003e\n\u003cp\u003eMagigoo Pro PC is designed to work exclusively with Polycarbonate type filaments. This adhesive for professional use, makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhy Magigoo Pro PC?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe strength and toughness of PC make it an ideal FDM material for the production of functional prototypes as well as end use part, nonetheless the material does present some printing challenges. Virgin PC has a high glass transition temperature (Tg) and thus can be used in high temperature applications. However, having a high Tg can make it very difficult to print using desktop printers, as these are usually not equipped to cater for the high printing temperatures required to print virgin PC. Virgin PC in fact tends to warp considerably when printed at an insufficient bed temperature (\u0026lt;130 ºC), in non-heated enclosed chambers without the use of an appropriate bed adhesive.\u003c\/p\u003e\n\u003cp\u003eMagigoo Pro PC can be used on glass or a multitude of other surfaces. Use on other plastic based surfaces, including sheets is recommended to provide strong adhesion and preventing the part from fusing to the sheet.\u003c\/p\u003e\n\u003cdiv class=\"col-xs-10 col-xs-offset-1 col-sm-6 col-sm-offset-0\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"row text-center\" id=\"ProductThumbs\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-xs-3 gallery-thumbnail\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"three-two bg-cover\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-xs-10 col-xs-offset-1 col-sm-6 col-sm-offset-0\"\u003e\n\u003cdiv id=\"ProductThumbs\" class=\"row text-center\"\u003e\n\u003cdiv class=\"col-xs-3 gallery-thumbnail\"\u003e\n\u003cdiv class=\"three-two bg-cover\"\u003e\n\u003cdiv class=\"content\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163817677078,"sku":"MPC2018","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/Magigoo-Pro-PC-HartSmart-Products-24960551.webp?v=1765323417"},{"product_id":"hsp1-buildtak-magnetic-bed-plate-bond-bed-adhesive","title":"HSP1 BuildTak Magnetic Bed Plate + Bond Bed Adhesive","description":"\u003ch3\u003eHartSmart Products HSP1-I BuildTak Bed Plate \u0026amp; Bed Adhesive\u003c\/h3\u003e\n\u003cp\u003eThis is a BuildTak Bed Plate created for HartSmart Products HSP1-I printer. These bed plates measure 660mm x 660mm. \u003cmeta charset=\"utf-8\"\u003eThe BuildTak bed plate is ideal for printing Polypropylene when combined with the BuildTak Bond bed adhesive (included with these plates). This is our recommended bed plate for printing PP and PP composites.\u003c\/p\u003e\n\u003cp\u003eThese magnetic spring steel bed plates are also compatible with Modix 3D printers. For the Big-60 and Big-120Z you will only need one, for the Big-120X you will need 2, and for the Big-180X you will need 3. \u003c\/p\u003e\n\u003cp\u003eEven better, these plates come with a locating feature to ensure that they are always lined up the same every time they are installed. Grab a set of the locating brackets \u003ca href=\"https:\/\/hartsmartproducts.com\/products\/bed-locating-brackets\" target=\"_blank\"\u003eHERE\u003c\/a\u003e if using these with a machine other than the HSP1!\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163817546006,"sku":"HSP1-BUILDTAK","price":299.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/HSP1-BuildTak-Magnetic-Bed-Plate-_-Bond-Bed-Adhesive-HartSmart-Products-24961179.jpg?v=1765323423"},{"product_id":"lgx®-lite-front-plates","title":"LGX® Lite Front Plates","description":"\u003ch3\u003eLGX® Lite Front Plates\u003c\/h3\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cb data-mce-fragment=\"1\"\u003eSpare part for the \u003ca href=\"https:\/\/hartsmartproducts.com\/products\/lgx%C2%AE-lite-large-gears-extruder\"\u003eBondtech LGX® Lite\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eDesigns include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAnnular\u003c\/li\u003e\n\u003cli\u003eBeeHive\u003c\/li\u003e\n\u003cli\u003eCubes\u003c\/li\u003e\n\u003cli\u003eDesert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eFront plate made of grey Polyamide without dyeing or any other chemical post processing.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eFeatures the LGX® Lite BONDTECH sticker.\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Annular","offer_id":50163817611542,"sku":"10087-1","price":3.97,"currency_code":"USD","in_stock":true},{"title":"Desert","offer_id":50163817644310,"sku":"10087-1D","price":3.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/LGXr-Lite-Front-Plates-HartSmart-Products-24961364.png?v=1765323425"},{"product_id":"filamentone-v6-silicone-socks-orange-pack-of-3","title":"FilamentOne V6 Silicone Socks – Orange (Pack of 3)","description":"\u003ch3\u003eFilamentOne V6 Silicone Socks – Orange (Pack of 3)\u003c\/h3\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProtective silicone socks for E3D V6-style heater blocks \u003c\/span\u003e\u003cspan\u003ewith size 23x16x11.5mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eCompatible with Prusa I3 MK3S MK3S+ and other printers\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eIncludes 3 silicone socks\u003c\/span\u003e\u003c\/p\u003e","brand":"HartSmart Products","offers":[{"title":"Default Title","offer_id":50163817775382,"sku":"F1-V6SOCKPACK","price":1.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0853\/4438\/7350\/files\/FilamentOne-V6-Silicone-Socks-_-Orange-_Pack-of-3_-HartSmart-Products-24961540.png?v=1765323433"}],"url":"https:\/\/www.3dprintiverse.com\/collections\/new-arrivals.oembed?page=7","provider":"3DPrintiverse.com","version":"1.0","type":"link"}