-
Felfil EVO Extruder & Spooler Bundle
Vendor:FelfilRegular price Starting at $1,789.99 USDSale price Starting at $1,789.99 USD Regular priceUnit price per -
LaserPecker 60W Laser Module for LX2
Vendor:LaserPeckerRegular price $1,699.00 USDSale price $1,699.00 USD Regular priceUnit price per$2,099.00 USDSale -
LaserPecker LX2 40W Enclosed Laser Cutter
Vendor:LaserPeckerRegular price $1,799.00 USDSale price $1,799.00 USD Regular priceUnit price per$2,499.00 USDSale -
LaserPecker LP4 Portable Dual-Laser Engraver (Diode + IR)
Vendor:LaserPeckerRegular price Starting at $1,199.00 USDSale price Starting at $1,199.00 USDUnit price perSale -
Shielding Combo
Vendor:The Virtual FoundryRegular price Starting at $181.98 USDSale price Starting at $181.98 USD Regular priceUnit price per -
Falcon2 Pro Enclosed Laser Engraver & Cutter
Vendor:Creality Official StoreRegular price Starting at $1,299.00 USDSale price Starting at $1,299.00 USDUnit price perSold out -
Creality Raptor Pro 3D Scanner
Vendor:Creality Official StoreRegular price $1,519.00 USDSale price $1,519.00 USD Regular priceUnit price per$1,999.00 USDSale -
FireX Sintering Kiln
Vendor:The Virtual FoundryRegular price $1,999.99 USDSale price $1,999.99 USD Regular priceUnit price per
Blog posts
View all-
I Stopped Throwing Away Failed Prints: My Real ...
I built a real DIY filament recycling loop with Felfil's shredder, extruder, and spooler to stop throwing away failed prints from my Flashforge Adventurer 5X and Bambu Lab A1. Here's...
I Stopped Throwing Away Failed Prints: My Real ...
I built a real DIY filament recycling loop with Felfil's shredder, extruder, and spooler to stop throwing away failed prints from my Flashforge Adventurer 5X and Bambu Lab A1. Here's...
-
Wet Filament Is Ruining Your Prints (Here's My ...
Stringing, popping, and rough surfaces almost always trace back to moisture, not your slicer settings. Here's how I store and dry filament across a Bambu A1 AMS, a Flashforge Adventurer...
Wet Filament Is Ruining Your Prints (Here's My ...
Stringing, popping, and rough surfaces almost always trace back to moisture, not your slicer settings. Here's how I store and dry filament across a Bambu A1 AMS, a Flashforge Adventurer...
-
AMS vs Toolhead Swapping: What I Learned Runnin...
AMS or toolhead-swapping? A hands-on comparison of Bambu's AMS and the Flashforge AD5X for multicolor 3D printing — filament waste, speed, reliability, and what to actually buy.
AMS vs Toolhead Swapping: What I Learned Runnin...
AMS or toolhead-swapping? A hands-on comparison of Bambu's AMS and the Flashforge AD5X for multicolor 3D printing — filament waste, speed, reliability, and what to actually buy.
