Bondtech LGX Large Gears eXtruder

Each LGX® extruder is supplied with:

·       1x LGX® feeder;

·       1x Custom Nema17 25mm pancake stepper motor;

·       1x Bowden Interface Plug (with threaded metal push-fit);

·       1x Direct Drive Interface Plug (for Slice Engineering hotends);

·       1x 2mm Hex Key (recommended tool);

·       1x Product Line Information Brochure;

·       1x Powered By Bondtech sticker.

·       3x M3x30 mm Low Head screws;

·       4x M3x18 mm Stud with 5mm Hex with M3x4 thread;

·       30mm PTFE tube to use in the Direct Drive Interface Plug.

This extruder only supports 1.75 mm size filament.